Help No ignition
Help No ignition
Author
Discussion

Tomej

Original Poster:

149 posts

181 months

Friday 16th March 2012
quotequote all
Hi All,

As you may have seen I've been trying to change the bubs on the dash of the cerb to brighter LED ones.

Done most of them, and all going well, then the other two arrived this morning.

I replaced the two in the speedo and the rev counter, all working well so put the dash back on.

Tried to start the ignition, and nothing....

Bugger!
I had a look under the dash and saw that there was a ribbon cable flaping about. I saw another ribbon cable plugged into a cirjcuit board so i checked that and there were 5 pins which look like the loose ribbon should be connected.
So I connected it, but still nothing.
I've checked the fuse and that's all good, can anyone help as I'm now a bit lost for what could be wrong.

All was fine last night.

Many thanks

Tom


Ballsy

317 posts

246 months

Friday 16th March 2012
quotequote all
Checked the silver key?

Tomej

Original Poster:

149 posts

181 months

Friday 16th March 2012
quotequote all
HA HA HA!!!!

Spot on Ballsy!

I just noticed that it didn't look right and thought "worth a go"... I was just going to say don't worry found the problem and you'd already replied.....

I swear I didn't touch it! I must have knocked it because I know better than to mess with "the silver key"

Thank You!

Ballsy

317 posts

246 months

Saturday 17th March 2012
quotequote all
Lol we have all been in that situation with the dreaded silver key lol.
Glad you managed to fix it mate