100mm LS intake hose?

[deadscoob]

Hi,

I'm trying to source a 102mm, 180 degree hose for the inlet an an LS7.

I've seen a couple of cars with silicone or carbon ones, can anyone point me in the direction of where to get these from. Can't find a supplier, emailed GD and not had a reply.

Something like these:






I know this has been raised before, but search still isn't working...

Cheers

[crafty]

one option for a tight bend is to use a donut

http://www.spareco.com.au/SSD102/102MM-360%27--STA...

[7litrebig]

Andy Burrows - at GD Cars

[phone]

[738 driver]

20 quid e-bay... search 180 degree silicone.
Enough meat on them to offset cut/shorten the straights hence keeping the bend as forward as poss. Have a used one in the garage but was specifically cut for a blower install, just retained for mocking-up ideas.

[deadscoob]

Ah I was searching for 100mm, it's 102 isn't it, doh

Cheers

[Gulf LS3]

http://www.ebay.co.uk/itm/Blue-Silicone-Hose-Elbow...

there you go....

regulator on the way you will also need 3 dash 6 o ring to dash 6 fittings, i have not got any left else i would have sent you three Craig.

please regulate after the injectors, we have seen drops across the injectors on the dyno

cheers Kyle

[highflyer]

Deadscoob you can have mine as in the top photo, because ive had that many fking time wasters, stupid offers and people not turn up, I will be breaking the car and selling it in bits.

[biggest1955]

hi can you lease tell me more about the air intake shown in the top photo or who makes them as it looks just like what i am after for my LS7 too?

cheers

[7litrebig]

biggest1955 said:

hi can you lease tell me more about the air intake shown in the top photo or who makes them as it looks just like what i am after for my LS7 too?

cheers

Andy Burrows - at Gardner Douglas makes those... [phone]

Mine is in black per this pic

[biggest1955]

many thanks, how did you rate this air box, did it improve performance due to cooler air please or ??
cheers

[7litrebig]

Only my personal opinion, but I've had mine on for 2 years - & very happy with it. The intake gets a nice cold air feed from the clip scoop - I preferred to the inlet being between the exhaust silencers (& I don't recall there was a dedicated boxed in system offered by the factory when I built mine though). Also uses a standard size panel air filter.

Also, dare I say it, it looks like it was actually designed for the car and finishes off the engine bay nicely.