Odometer reading Miles
Discussion
There should be an adjustable resistance called PotMeter in the unit which you can use to adjust it
its best to jack the car up and drive it tru the gears and the revs in the gear should correspond with the speed.
Like 1000 rpm in 5th or 6th gear check what the reading should be and adjust it accordingly if there is no potmeter incorporated you can buy one they are quite cheap
its best to jack the car up and drive it tru the gears and the revs in the gear should correspond with the speed.
Like 1000 rpm in 5th or 6th gear check what the reading should be and adjust it accordingly if there is no potmeter incorporated you can buy one they are quite cheap
The Ultima speedo has a correction factor in it for both units of measurement and speed. Don't make it complicated call the factory and they will send you the instructions or tell you where to find them on the build disc. the adjustment for speed is done with the reset button you push and hold, the units blink, then you use the button to move the units up or down to correct the speed displayed. Thats kind of how it works but get the factory to help. Lee
Hi,
Thanks for the input guys.
I have calibrated the speedo as per instructions and it is reading fairly accurately.
That is not my problem.
The odometer has a digital read out in the middle of the speedo, that is reading in "Miles" travelled??
Not a big issue, I can ask the factory next time I'm on the phone, just thought someone here would have found the same thing
Adam
Thanks for the input guys.
I have calibrated the speedo as per instructions and it is reading fairly accurately.
That is not my problem.
The odometer has a digital read out in the middle of the speedo, that is reading in "Miles" travelled??
Not a big issue, I can ask the factory next time I'm on the phone, just thought someone here would have found the same thing
Adam
Gassing Station | Ultima | Top of Page | What's New | My Stuff