spacesaver wheel
spacesaver wheel
Author
Discussion

cshaw600

Original Poster:

108 posts

174 months

Thursday 5th April 2012
quotequote all
Hi does anyone have a spavesaver wheel i am running 18" spiders with 35 profile tyres and if so what car does wheel come from thanks

Tanguero

4,535 posts

230 months

Thursday 5th April 2012
quotequote all
Holts Tyre Weld is the factory fitted item.

Gazzab

21,637 posts

311 months

Thursday 5th April 2012
quotequote all
This has ben dscussed before.... I dont believe anyone found one. Also isnt there an insurance issue should you use one?
I have had 2 punctures in my life that have left me stranded - both in a cerb and both due to porous RL7's. So the risks are low. A can of tyre sealant is probably good enough?

cshaw600

Original Poster:

108 posts

174 months

Thursday 5th April 2012
quotequote all
I didnt hnow there could be insurance issues and i currently have 2 tins tyreweld in the boot cheers

Tyre Smoke

23,018 posts

290 months

Thursday 5th April 2012
quotequote all
Stud pattern is the same as a Chrysler Voyager if you must get a spare wheel. Tyre Weld all the way for me.

kevin63

4,661 posts

282 months

Thursday 5th April 2012
quotequote all
I've driven a TVR on a space saver and it's not recommended. I don't know about insurance issues but I certainly thought there was a keeping alive issue when using a space saver.

GT6k

965 posts

191 months

Thursday 5th April 2012
quotequote all
My experience is that you should carry a spare alternator, as I have been stranded 4 times in my driving career by failed alternators and have never had a flat tyre on my own car. The only flats I have had were on other peoples old cars with very old tyres.

PoleDriver

29,585 posts

223 months

Friday 6th April 2012
quotequote all
I had a flat on mine a while back. Connected the can of tyre weld to it and watched a big splodge of foam appear from the back of the wheel! I wished I'd had a spacesaver that day! (My wedge came complete with one!)

Robscim

840 posts

285 months

Saturday 7th April 2012
quotequote all
If you had a space saver spare wheel and had to use it, where would you put the flat Spider?? I'm not sure it would fit in the passenger seat and if you did have a passenger, how would you break it to them that their ride was over as the wheel was more important!!! hehe I'm going to guess you'd need the recovery truck to take the wheel!!!

Rob

jackwibble

664 posts

188 months

Saturday 7th April 2012
quotequote all
Square of carpet and a ratchet strap busted spider on roof spacesaver on both windows down due ratchet straps holding spider to roof dial in 3,000 rpm and listen to the pops and bangs as you crawl home in 2nd gear thumbup

kevin63

4,661 posts

282 months

Saturday 7th April 2012
quotequote all
jackwibble said:
Square of carpet and a ratchet strap busted spider on roof spacesaver on both windows down due ratchet straps holding spider to roof dial in 3,000 rpm and listen to the pops and bangs as you crawl home in 2nd gear thumbup
Is this something you've seen in your previous job laugh or just the idea of a genius smile

jackwibble

664 posts

188 months

Sunday 8th April 2012
quotequote all
Well sort of but not on a Cerbera i must confess laugh

Brummmie

5,284 posts

250 months

Sunday 8th April 2012
quotequote all
Mazda RX7 with the stud holes drilled open to suit (loads of Jap 5 stud are same pattern), i think its also aluminium so super light! An 18" spider will also go in the boot.
I get 1 10" wide trackday wheel and tyre in my boot, and another on top of the transmission tunnel in the back.

Ireland

3,517 posts

243 months

Sunday 8th April 2012
quotequote all
I had an R-34 Skyline when I got my Cerb and I checked and the space-saver from that would fit perfectly if the centre hole was enlarged a bit.

The bolt pattern definitely is the same.

tinker-27

835 posts

253 months

Monday 9th April 2012
quotequote all
I have a spare alloy space saver at work if you need one ,