Brake pedal help
Discussion
The rubber/steel cover ont he brake pedal came off yesterday,I am trying to put it on and see it should fit easily back on with careful use of a screwdriver....but I can't for the life of me get enough access into the footwell to do it ?
Anyone done this ? Any tips appreciated .
Gallardo by the way.
Anyone done this ? Any tips appreciated .
Gallardo by the way.

Pic is crap
Hi mate,hope you have already sorted it,but if not, i pulled mine off so i`d know what your up against

Had a fiddle ,yeah pita.
I bent the rubber lip about ,which seemed to make it softer ish.
I then used a real small amount of silicon spray on the inside lip,both hands in first i got the left side kind of in position,then bent and pulled the large rubber on the right side.
This stretched it slightly and it just popped back on .
Maybe give the pad a good clean after,silicon on the outside surface wouldn`t be good eh.
Cheers
V10 BAT said:

Pic is crap
Hi mate,hope you have already sorted it,but if not, i pulled mine off so i`d know what your up against

Had a fiddle ,yeah pita.
I bent the rubber lip about ,which seemed to make it softer ish.
I then used a real small amount of silicon spray on the inside lip,both hands in first i got the left side kind of in position,then bent and pulled the large rubber on the right side.
This stretched it slightly and it just popped back on .
Maybe give the pad a good clean after,silicon on the outside surface wouldn`t be good eh.
Cheers
franki68 said:
It's going in for a service shortly so I will leave it to them. (starts saving)
a shame, if you want some silicone lube to try again yourself, pm me your address and i'll stick a small tube in the post, we have them at work to help with getting pacemaker leads into the header of the unit, sure does make plastic slippery!at least you know it can be done, and doesn;t take long if you can get your hands into the well...
Gassing Station | Supercar General | Top of Page | What's New | My Stuff



, i started typing the exact same advice 3hr ago but didn;t submit as i wasn't sure....