Sagaris window stops

[cinquecento]

Just above the door windows are small rubber bump stops (screwed into the roof under the pinchweld/door rubber) which I assume are there to cushion the closing window. Are they available anywhere?. Need to replace the RHS one.

[cinquecento]

Further to this.. does someone how the window knows it's fully up.. does the motor cut out at certain position..or after a certain amount of resistance is encountered as the window squeezes on the bump stop or door seal?

thanks..

[mindstar]

Inside the door, at the top of the window mechanism, there is an adjustment screw. when the moving assembly hits that it stops and after 1 sec or so the motor cuts out. AFAIK that's how you adjust the fully closed position; wind it all the way down and then bit by bit up, until the window sits in the recess at the top.
So to answer your question, yes, I believe it stops after a certain amount of resistance is encountered.

[mindstar]

Also, that rubber bump stop is there to stop the window rubbing on the fiberglass. Not to stop the window going further up.

[cinquecento]

Excellent... Thanks Kim