Advice needed please !

[TaffPaul]

Hi,

Have got a Speed 6 Cerbera which has been off the road for approx 2 years. Looking to get it back on the road for the summer, started up fine on the weekend put it into gear where the clutch went in fine and returned loose and is flapping.

Can anybody please give me any advice as I am hoping it is not going to cost me the earth in getting it fixed.

Thanks,

Paul

[pmessling]

Try bleeding the clutch and see if it has improved.

[greenracing]

If bleeding doesnt help, its most likely the slave cylinder seals that have gone or possibly the master cylinder seals. Any fluid on the floor under the belhousing?

[gizmo67]

TaffPaul said:

Hi,

Have got a Speed 6 Cerbera which has been off the road for approx 2 years. Looking to get it back on the road for the summer, started up fine on the weekend put it into gear where the clutch went in fine and returned loose and is flapping.

Can anybody please give me any advice as I am hoping it is not going to cost me the earth in getting it fixed.

Thanks,

Paul

Hi Paul Did you check for a leak under the car under the bell housing? also have you removed the scuttle panel and knee cap over the master cylinder to check the fluid level? Give me a ring if you need any help or advice. You know my number matey.