Danny Winstanley/TVR's in Britcar?
Danny Winstanley/TVR's in Britcar?
Author
Discussion

S6 ROR

Original Poster:

1,590 posts

294 months

Thursday 12th April 2012
quotequote all
It was posted last year that Danny and a few of the GTF's would be racing in Britcar this year.
There is a round at Donnington on 21st March, and just wondering if any of them will be entering. There are no TVR's listed on the drivers entry list on the Britcar website.

pblake

399 posts

251 months

Friday 13th April 2012
quotequote all
Steve Glynn was at the opening round at silverstone in a Sag but I don't think he's going to dony

Brummmie

5,284 posts

250 months

Friday 13th April 2012
quotequote all
Dannys Sag is being converted to LSx Power by Dyno Torque in B'ham.
They were muttering about some Dutch GT series, but cannot be definite.

gcpeters

1,002 posts

261 months

Friday 13th April 2012
quotequote all
how come its changing to an LS? i thought he had great sucess with powers SP6?



Brummmie

5,284 posts

250 months

Friday 13th April 2012
quotequote all
gcpeters said:
how come its changing to an LS? i thought he had great sucess with powers SP6?
More power Mr Sulu...

RedSpike66

2,343 posts

241 months

Friday 13th April 2012
quotequote all
gcpeters said:
how come its changing to an LS? i thought he had great sucess with powers SP6?
Apparently, did't get enough track testing time due to Dom being very cautious with the engine after every race...

tinker-27

835 posts

253 months

Friday 13th April 2012
quotequote all
The sag is under going lots of changes looks and engine gearbox etc , 7.0l Ls motor throttle bodies etc build should be under way soon !!!

S6 ROR

Original Poster:

1,590 posts

294 months

Saturday 14th April 2012
quotequote all
tinker-27 said:
The sag is under going lots of changes looks and engine gearbox etc , 7.0l Ls motor throttle bodies etc build should be under way soon !!!
Thought that this work was due to start at the end of last season in readiness for the start of this season. From the above, I take it that the project is far from finished