And the next step is....

[drive2tractors]

I've got both rear hubs stripped down to this:



How do I get all the bearings out and apart? Is there a circlip under the blue dirt seal or can I press out the hub by pressing the centre splined shaft out?
Any help appreciated.
d2t

[carsy]

Yes those two pieces will just pull apart. There is no cir clip. Its just a matter of pressing the inner races off. You may manage with a simple puller if its not too tight. Just be careful drifting the outer races out so as not to cause any damage.

[drive2tractors]

carsy said:

Yes those two pieces will just pull apart. There is no cir clip. Its just a matter of pressing the inner races off. You may manage with a simple puller if its not too tight. Just be careful drifting the outer races out so as not to cause any damage.

Yep, all apart now thanks. I ended up going to a friend who has a press, they took quite a force to get out!
Many thanks.
d2t