Ferrari/Brembo CC Brakes
Ferrari/Brembo CC Brakes
Author
Discussion

Diamond blue

Original Poster:

3,288 posts

231 months

Friday 13th April 2012
quotequote all
Can anyone tell me whether there is an alternative to factory replacement brake rotors around?
Either replacement steels or alternative/aftermarket CC rotors that will fit?
Anyone done it on a CS or Scuderia?

Ferraris "black magic" algorithm electronics can tell you how "worn" your discs are based on how much and how heavily you've used the brakes apparently but I'm told only getting them off the car and weighing them can confirm whether they really are near the end. When they're done Ferrari are asking for £12,000 to replace them. Thats not the calipers or the bells , just the discs (and pads I assume)Its possible to replace the whole braking system in a GTR with a superb Alcon kit for less than that!

Surely as they are Brembo parts it must be possible to do better.

Are the Corvette ZR1 CCs the same? Seem to be half the price.

Schnellmann

1,893 posts

235 months

Friday 13th April 2012
quotequote all
Diamond blue said:
Can anyone tell me whether there is an alternative to factory replacement brake rotors around?
Either replacement steels or alternative/aftermarket CC rotors that will fit?
Anyone done it on a CS or Scuderia?

Ferraris "black magic" algorithm electronics can tell you how "worn" your discs are based on how much and how heavily you've used the brakes apparently but I'm told only getting them off the car and weighing them can confirm whether they really are near the end. When they're done Ferrari are asking for £12,000 to replace them. Thats not the calipers or the bells , just the discs (and pads I assume)Its possible to replace the whole braking system in a GTR with a superb Alcon kit for less than that!

Surely as they are Brembo parts it must be possible to do better.

Are the Corvette ZR1 CCs the same? Seem to be half the price.
I assume you could fit the steel discs from the standard 360/430 but not sure.

You might want to shop around. When I was looking for a CS I was going to buy one that needed new discs. Quote from official F dealer was CHF 25'000 but I found a specialist that would do it for just CHF 15'000 (including pads, labour and VAT).


anonymous-user

85 months

Friday 13th April 2012
quotequote all
I read Simon George from EVO replaced the CCs on the 458 with steel replacements but was then informed it would void his warranty so he had to go back to CC.

Diamond blue

Original Poster:

3,288 posts

231 months

Friday 13th April 2012
quotequote all
Schnellmann said:
Diamond blue said:
Can anyone tell me whether there is an alternative to factory replacement brake rotors around?
Either replacement steels or alternative/aftermarket CC rotors that will fit?
Anyone done it on a CS or Scuderia?

Ferraris "black magic" algorithm electronics can tell you how "worn" your discs are based on how much and how heavily you've used the brakes apparently but I'm told only getting them off the car and weighing them can confirm whether they really are near the end. When they're done Ferrari are asking for £12,000 to replace them. Thats not the calipers or the bells , just the discs (and pads I assume)Its possible to replace the whole braking system in a GTR with a superb Alcon kit for less than that!

Surely as they are Brembo parts it must be possible to do better.

Are the Corvette ZR1 CCs the same? Seem to be half the price.
I assume you could fit the steel discs from the standard 360/430 but not sure.

You might want to shop around. When I was looking for a CS I was going to buy one that needed new discs. Quote from official F dealer was CHF 25'000 but I found a specialist that would do it for just CHF 15'000 (including pads, labour and VAT).
That may well be possible but they are very different sizes and I'm not sure the caliper is compatible. Now that CCs are so much more common I find it hard to believe that specialists like Alcon/AP/MOVIT can't supply decent alternatives.

Enricogto

646 posts

176 months

Friday 13th April 2012
quotequote all
ZR1 uses the same disc, I confirm.

Diamond blue

Original Poster:

3,288 posts

231 months

Friday 13th April 2012
quotequote all
Enricogto said:
ZR1 uses the same disc, I confirm.
Thanks Enrico.
Is that the same as the Scuderia (398mm dia)or the CS (380mm dia )

AndrewW-G

11,968 posts

248 months

Friday 13th April 2012
quotequote all
you can look up part numbers and specs here

http://www.brembo.com/en/car/original-equipment/pr...