Its dropped off !
Discussion
The drivers door mirror, silly! Door mirror went a bit "floppy" today thought it was loose on the mounting rubber, but it appears to have broken at the top of the alloy housing inside.
Have done a search on here and all I found was the offer of repair by Racing Green, has anyone done a similar repair themselves, or is it a case of stuff a load of Sikaflex in it and stick it together, hopefully someone has done a pukka job !
Thanks
Richard
Have done a search on here and all I found was the offer of repair by Racing Green, has anyone done a similar repair themselves, or is it a case of stuff a load of Sikaflex in it and stick it together, hopefully someone has done a pukka job !
Thanks
Richard
Although the picture doesnt do it justice, is this the bit thats broken?
http://www.clever-trevor.net/TVR/Parts_details/U06...
If so its fiddly but replaceable.
http://www.clever-trevor.net/TVR/Parts_details/U06...
If so its fiddly but replaceable.
Mine did exactly the same thing, if it's the internal frame like mine was, I was able to use chemical metal to get a fairly decent repair. Someone else on here used rivets and a fresh piece of metal plate.
The job is fiddly as hell and I managed to then break the tower part by over tightening the lug nut which fastens it on the boss, and had to buy a new one from clever Trevor.
The bible has a good description of how the mirror assembly all fits together there are also some good threads on here with better pictures.
Plan for the job taking a few hours and be prepared for a lot of faffing and retrying to get it all aligned properly and be very careful with paintwork it's very easy to chip paint and scratch the door, I know from experience
The job is fiddly as hell and I managed to then break the tower part by over tightening the lug nut which fastens it on the boss, and had to buy a new one from clever Trevor.
The bible has a good description of how the mirror assembly all fits together there are also some good threads on here with better pictures.
Plan for the job taking a few hours and be prepared for a lot of faffing and retrying to get it all aligned properly and be very careful with paintwork it's very easy to chip paint and scratch the door, I know from experience

Richard
Had same problem with the Griff. Fiddly but doable. Links are all you need to know, I think!!
http://www.pistonheads.co.uk/gassing/topic.asp?h=0... door mirror - ??? Help please!
http://www.pistonheads.co.uk/gassing/topic.asp?h=0... frame for offside wing mirror
Had same problem with the Griff. Fiddly but doable. Links are all you need to know, I think!!
http://www.pistonheads.co.uk/gassing/topic.asp?h=0... door mirror - ??? Help please!
http://www.pistonheads.co.uk/gassing/topic.asp?h=0... frame for offside wing mirror
Gassing Station | Chimaera | Top of Page | What's New | My Stuff



