Problem Printer
Discussion
My dads printer is playing up, and I cant fix it for him, so hoping PH can answer
Its an Epson C44 he hasnt used it a while and the ink has dried i think
we have tried cleaning nozzles and cleaning heads through the maintenance programs which it doesnt appear to be doing anything
after a few sheets of printing the black is now coming through quite clear and sharp but the colour is still not right, missing lines, not vivid colour
so i bought a new cartridge and open the lid to fit it and the cartridges dont reel along to let me change them.
power button is on, red button continually flashing.
any ideas?
Its an Epson C44 he hasnt used it a while and the ink has dried i think
we have tried cleaning nozzles and cleaning heads through the maintenance programs which it doesnt appear to be doing anything
after a few sheets of printing the black is now coming through quite clear and sharp but the colour is still not right, missing lines, not vivid colour
so i bought a new cartridge and open the lid to fit it and the cartridges dont reel along to let me change them.
power button is on, red button continually flashing.
any ideas?
This works for HP carts as I've had a few brand new ones that won't work, never mind ones that have been sitting in the printer. The process I follow is below and it has worked for all cartridges.
Sit the cartridge on wet kitchen towel for 10 mins. Usually if this works you will see all the colours get drawn out into the towel.
If that doesn't work
Sit the carts in 3mm of warm water for an hour or so. Then sit them on the wet paper towel again.
Final solution, sit cart in hot water for an hour. then try wet paper towel again.
[nanny state mode]
take care with hot water young man
[/nanny state mode]
Keep us posted as other may be interested to know if this works for Epson too.
Sit the cartridge on wet kitchen towel for 10 mins. Usually if this works you will see all the colours get drawn out into the towel.
If that doesn't work
Sit the carts in 3mm of warm water for an hour or so. Then sit them on the wet paper towel again.
Final solution, sit cart in hot water for an hour. then try wet paper towel again.
[nanny state mode]
take care with hot water young man
[/nanny state mode]
Keep us posted as other may be interested to know if this works for Epson too.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


