996 Turbo wheel spacers
Discussion
Hi Jay,
Have a look at this thread where I included photos of the 17mm rears which are recommended from Porsche as the correct fitment ~ I wouldn't go any larger. I went for the 5mm on the fronts, but haven't fitted them yet as it definitely needs them to balance the rears aesthetically.
Cheers,
Podro
Have a look at this thread where I included photos of the 17mm rears which are recommended from Porsche as the correct fitment ~ I wouldn't go any larger. I went for the 5mm on the fronts, but haven't fitted them yet as it definitely needs them to balance the rears aesthetically.
Cheers,
Podro
Unless you specifically need more clearance at the rear e.g. to run different intake piping like we do when we fit a y-pipe, the best spacer kit is the GT3 option upgrade kit which is 5mm all corners, comes supplied with all the longer bolts, locking nuts etc. Retails around £215+VAT but can be had for cheaper.
30mm Sounds way too wide to me, I'd like to see some before and after pics... 
http://www.youtube.com/watch?v=nqqZ28m8uCo
...As you say, 5mm front, 15mm rear, should be fine

http://www.youtube.com/watch?v=nqqZ28m8uCo
...As you say, 5mm front, 15mm rear, should be fine
Edited by EvoSlayer on Monday 23 April 20:13
Gassing Station | Porsche General | Top of Page | What's New | My Stuff


