M Tech steering wheel removal
M Tech steering wheel removal
Author
Discussion

Whiters

Original Poster:

364 posts

270 months

Saturday 28th April 2012
quotequote all
Hi -
I need to replace the main lighting bulbs in the instrument cluster on my wife's e36 328. It has the M Tech wheel (like below) which I need to remove first. Is it just a case of brute force to remove the horn cover as there doesn't seem to be any place around its edge that yields significantly when I'm trying to pull the cover off. Or do I need to remove the two plastic side caps before I can remove the centre one?

Any tips appreciated.


rumple

15,415 posts

182 months

Saturday 28th April 2012
quotequote all
Never removed a steering wheel, but on my old 328 i fitted rings on the clocks, i got the cluster out with the wheel on, that was the older triangle shaped airbag wheel though

E30M3SE

8,493 posts

227 months

Saturday 28th April 2012
quotequote all
There will be fixing (torx headed bolts recessed into the back of the wheel) that need to be undone from the back of the wheels in order to remove the airbag/horn push.

Disconnect the battery first and leave for 15 mins.

Whiters

Original Poster:

364 posts

270 months

Saturday 28th April 2012
quotequote all
rumple said:
Never removed a steering wheel, but on my old 328 i fitted rings on the clocks, i got the cluster out with the wheel on, that was the older triangle shaped airbag wheel though
Thanks. Works with that wheel's larger diameter - just, but not with this one it seems.

Whiters

Original Poster:

364 posts

270 months

Saturday 28th April 2012
quotequote all
E30M3SE said:
There will be fixing (torx headed bolts recessed into the back of the wheel) that need to be undone from the back of the wheels in order to remove the airbag/horn push.

Disconnect the battery first and leave for 15 mins.
Cheers, will give this a whirl. Is the 15mins after battery disconnect to disable airbag?

JoPo1

386 posts

188 months

Saturday 28th April 2012
quotequote all
Yep, disconnect battery, leave 15 minutes and then take 2 torx out rear of wheel, that will remove airbag as one unit, unplug aibag connectors, should be two of them. Careful handling the airbag, its a dangerous part, probably me being paranoid but still be careful haha.

Then its just a 16mm nut and itll pull off with a bit of a nudge.

Please make sure the wheels back on properly though!

ADM06

1,077 posts

203 months

Saturday 28th April 2012
quotequote all
Whiters said:
Thanks. Works with that wheel's larger diameter - just, but not with this one it seems.
I too got my cluster out with the wheel on, big triangle wheel. I'd have thought it'd be easier with a small wheel. confused

Quinten

1,172 posts

272 months