Meguires, am I doing something wrong...
Discussion
Maybe using too much product. You can also lightly spritz the foam applicator with water to keep it slightly damp when applying the wax.
With Meguiar’s Ultimate Paste Wax, you should only need 2-3 small dabs of product per panel, and these should be applied as THINLY and EVENLY as possible.
Leaving the wax on for longer should not make any difference. You can either apply to a panel at a time and buff off or apply to the whole car then buff off.
It's a case of where 'Less is More'.
With Meguiar’s Ultimate Paste Wax, you should only need 2-3 small dabs of product per panel, and these should be applied as THINLY and EVENLY as possible.
Leaving the wax on for longer should not make any difference. You can either apply to a panel at a time and buff off or apply to the whole car then buff off.
It's a case of where 'Less is More'.
Edited by trv8 on Sunday 29th April 20:45
Edited by trv8 on Sunday 29th April 20:47
Edited by trv8 on Sunday 29th April 20:47
Gassing Station | Bodywork & Detailing | Top of Page | What's New | My Stuff