Griffith Oil Filter
Discussion
lazyitus said:
Anyone have part number(s) for a 5.0ltr Griff oil filter please?
I assume you can pick them from a regular Halfords shelf?
Cheers
Lazy
Use a Land Rover outlet. I use the same in my Griff as in my Land Rover Defende! Just look online in Land Rover outlets, the same filter fits the Range Rover 3.9, 4.2, 4.9 etc as well as the Defender variants. I buy the Coopers filters by the pack of 10 for both vehicles, last batch cost me about £32 delivered! Don't forget you will need a new sump plug copper sealing washer. All the best, PeteI assume you can pick them from a regular Halfords shelf?
Cheers
Lazy
Thanks chaps, very helpful as ever.
PeteGriff said:
Don't forget you will need a new sump plug copper sealing washer.
Where do I get them from ? Having said that, I've got a new Steve Heath magnetic sump plug ready to go in so I probably don't need a new sump plug copper sealing washer??lazyitus said:
Where do I get them from ? Having said that, I've got a new Steve Heath magnetic sump plug ready to go in so I probably don't need a new sump plug copper sealing washer??Got my filters here:
http://www.paddockspares.com/err3340g-oil-filter-g...
Cheap for genuine LR filters, although I've got a fibreglass filter on the pre cat now but it don't fit the 500 - too long
FFG
Which cars??? I've bought my 3340 now!! Barreti said:
Not a bad guess Paul.
I just plopped the Z1159 Coopers version of ERR3340 onto the bench and measured it at 107mm or 10.7cm or 4.3/16"
I just wanted an excuse to be in the garage for a bit
This is the same Coopers filter I mentioned in my previous message. Great filters and at the price they are an oil & filter change more frequently is no excuse. Regards, PeteI just plopped the Z1159 Coopers version of ERR3340 onto the bench and measured it at 107mm or 10.7cm or 4.3/16"
I just wanted an excuse to be in the garage for a bit
lazyitus said:
Where do I get them from ? Having said that, I've got a new Steve Heath magnetic sump plug ready to go in so I probably don't need a new sump plug copper sealing washer??Alternatively you get them from any LR dealer or an indie working on Landys.
You can anneal them too apparently, though I've never tried it.
FlipFlopGriff said:
What's on it now?
Dunno, not been near the car in the last few days. Will check but from memory it seemed to be the same sort of length as the new one I bought yesterday. I'm sure it will be.Barreti said:
lazyitus said:
Where do I get them from ? Having said that, I've got a new Steve Heath magnetic sump plug ready to go in so I probably don't need a new sump plug copper sealing washer??Alternatively you get them from any LR dealer or an indie working on Landys.
You can anneal them too apparently, though I've never tried it.
lazyitus said:
Me again.
Just out of interest, where would I source a copper ring for the sump plug? My Steve Heath magnetic plug didn't fit properly for some reason ( we tried, believe me, we tried
) so ended up putting the old plug back in and didn't have a spare copper ring. 
Hi there, its a Land Rover part as used on Defender 200Tdi, 300Tdi, V8, also Range Rover Classic. I use the same one as I keep for my Defender 90, regards, PeteJust out of interest, where would I source a copper ring for the sump plug? My Steve Heath magnetic plug didn't fit properly for some reason ( we tried, believe me, we tried
) so ended up putting the old plug back in and didn't have a spare copper ring. Gassing Station | Griffith | Top of Page | What's New | My Stuff