Help needed fitting CKO1080

[DeanoRR]

I need some help connecting up my CKO1080 to my ibus anologue tv tuner. I have the AV interface lead, but need help with where the RCA leads go.

[DennisCooper]

Much more information required!

What's a 'cko1080' ?

what car do you have?

what are you trying to do?!

I'd suggest calling a local reputable car audio installation specialist and have them do the work as well !

Cheers, Dennis!

[E30M3SE]

It's a digital TV tuner.

What's it going into?

Which AV interface do you have?

The TV tuner will have a AV output (yellow) and a stereo RCA output, so you need to connect the AV output to the AV input on the AV interface and the RCA output on the tuner to the RCA input on the AV interface.

Edited by E30M3SE on Thursday 3rd May 11:17

[DeanoRR]

Cheers for the help, so just to be clear, I have the OE silver analogue tv tuner fitted in the boot, I then have the AV interface lead connected between the analogue tuner and the digital CKO tuner. The connections I have on the CKO tuner are: AV IN 2 (yellow,red,White) AV IN 1 (yellow,red,White) VIDEO OUT (yellow,yellow,yellow) AUDIO OUT (red,White). On the AV interface lead I have 1x VIDEO OUT. 1 x VIDEO IN. 1 x AUDIO IN. 1 x CAMERA IN. I also have a set of yellow red and White RCA leads and a y piece RCA splitter.

[E30M3SE]

DeanoRR said:

Cheers for the help, so just to be clear, I have the OE silver analogue tv tuner fitted in the boot, I then have the AV interface lead connected between the analogue tuner and the digital CKO tuner.

The connections I have on the CKO tuner are: AV IN 2 (yellow,red,White) AV IN 1 (yellow,red,White) VIDEO OUT (yellow,yellow,yellow) AUDIO OUT (red,White).


On the AV interface lead I have 1x VIDEO OUT. 1 x VIDEO IN. 1 x AUDIO IN. 1 x CAMERA IN. I also have a set of yellow red and White RCA leads and a y piece RCA splitter.

So in order to run just the digital TV tuner, you need to connect the VIDEO OUT on the CKO to the 1 x VIDEO IN on the AVI and the AUDIO OUT (red,White) on the CKO to the 1 x AUDIO IN on the AVI using the Y piece RCA splitter (the AVI your using only receives a mono signal although the CKO has a stereo output).

[DeanoRR]

Top man, will connect it up as soon as I finish work. So presumably the camera input is for reverse camera and the AV1 and AV2 are for connecting games consoles etc, so what is VIDEO OUT used for?

[E30M3SE]

To send the VIDEO signal to additional screen(s).