Making it quieter
Making it quieter
Author
Discussion

jackh707

Original Poster:

2,132 posts

185 months

Sunday 6th May 2012
quotequote all
Just wondering if there it's possible to make a baffle or something to stick in the end of the exhaust, getting a bit fed up with the car, feel really antisocial putting your foot down in it due to the noise generated, ear plugs are a must, quite enjoy staying under the radar.

I assume the exhaust needs repacking?

We are going to make a carbon fibre silencer in the near future anyway with the aim of 'added lightness' and some noise reduction, but up until then a quick fix would be nice.

Incorrigible

13,668 posts

290 months

Sunday 6th May 2012
quotequote all
What exhaust is it and how old ? The standard ones are re-packable but it does required re-wleding, which isn't the most aesthetic of finishes

twobone

123 posts

185 months

Monday 7th May 2012
quotequote all
On my car, I found exhaust leaks at the 4 into 1 collector were making a big racket. You might want to check


jackh707

Original Poster:

2,132 posts

185 months

Tuesday 8th May 2012
quotequote all
It's a raceline exhaust.
I think you might be right about the 4 into 1. One of the headers is blowing there and it's probably not helping, had a go at getting a better seal previously but struggled. Might try some exhaust wrap tape.

four20

10 posts

180 months

Sunday 13th May 2012
quotequote all
you'll probably end up getting deafened by induction roar if you go for a quiet exhaust. my pipe was tested at 98db and the carbs were making 96db at a recent trackday. sounds very spitfiresque when blatting but becomes an annoying drone when cruising on the M-way.

Ult-Jim

624 posts

219 months

Sunday 13th May 2012
quotequote all
K-series R500 230 bhp with a Raceco can, measured 96db at Motorsports-events Abingday Track day on 11th May 2012. I hope that helps for reference. Ult-jim