Why make the sump nut hollow...
Discussion
steve_bmw said:
so you can get an easy out in the middle without having to drill it out and get fash in sump.
That was my conclusion but is that not creating a solution to a problem that wouldn't exist if it wasn't hollow?A 12mm bolt is not going to shear off without being done up by a gorilla.
A 12mm bolt with a 6mm hole can be sheared off by me in an instant!
dirty doug said:
That was my conclusion but is that not creating a solution to a problem that wouldn't exist if it wasn't hollow?
A 12mm bolt is not going to shear off without being done up by a gorilla.
A 12mm bolt with a 6mm hole can be sheared off by me in an instant!
A 12 mm bolt into aluminium can strip the threads, I would rather snap the sump plug than have to replace the sump because I have buggerd up the threads.A 12mm bolt is not going to shear off without being done up by a gorilla.
A 12mm bolt with a 6mm hole can be sheared off by me in an instant!
Those sump plugs don't have to be mega tight, just nipped up and then a gentle tug will do.
Gassing Station | BMW General | Top of Page | What's New | My Stuff



