E38 740 chain guide problems
Discussion
Was thinking of replacing my E38 750i (advert to follow over the next day or so) with a 740i. Fancy a V8. 2000 or 2001 reg. But I've recently been told that they are increasingly suffering from chain guide-related issues, as the part is made of plastic and they are starting to get brittle and break up with age, with obvious resultant problems. Chap that told me knows his stuff, just wanted to know whether any owners out there had the issue...Costs around £1700 apparently, even if done as a preventative measure...
I'm really curious as to why you'd want to go from a V12 750 to a V8 740?
I have been thinking about perhaps making a move from an E38 750i to an E39 M5. This is of course the same sort of thing but the V12 seems bullet proof and it is my lazy weekend motorway car and so I worry that I may end up with a not bullet proof and not relaxing replacement.
I have been thinking about perhaps making a move from an E38 750i to an E39 M5. This is of course the same sort of thing but the V12 seems bullet proof and it is my lazy weekend motorway car and so I worry that I may end up with a not bullet proof and not relaxing replacement.
V8 timing chain issues are not common and should not put you off buying one. Yes it is a major task if it does fail and the usual failures are from over revving the engine, something that is unlikely on an auto transmission.
You would have more to worry about with the nikasil issues and oil burning than the timing chain tensioners.
8Tech.
You would have more to worry about with the nikasil issues and oil burning than the timing chain tensioners.
8Tech.
I've read the problem is normally caused by a failure of a spring in the timing chain tensioner. This spring basically keeps the chain tensioned when there is no oil pressure during startup.
If the spring weakens or snaps the chain can flap around before the oil pressure has had a chance to push out the tensioner and tighten the chain. This can snap bits off the plastic chain guide as the chain slaps against it.
My e39 540i has 120K on it and I took the precaution of changing the tensioner. It's easy to change and costs about £40 IIRC.
My spring hadn't snapped but it was a lot shorter than the one in the new tensioner presumably due to age.
Just wanted to make sure people know it doesn't seem to be a random failure and there is a way of mitigating it up to a point.
If the spring weakens or snaps the chain can flap around before the oil pressure has had a chance to push out the tensioner and tighten the chain. This can snap bits off the plastic chain guide as the chain slaps against it.
My e39 540i has 120K on it and I took the precaution of changing the tensioner. It's easy to change and costs about £40 IIRC.
My spring hadn't snapped but it was a lot shorter than the one in the new tensioner presumably due to age.
Just wanted to make sure people know it doesn't seem to be a random failure and there is a way of mitigating it up to a point.
Gassing Station | BMW General | Top of Page | What's New | My Stuff


