Glue for under bonnet

[martinworth]

Anyone know where to get hold of the special glue to stick the silver heat sheild up under the bonnet? Mine keeps falling down over the engine when it gets hot.

[crimson king 500]

Sorry Martin that I can't help, but moving the thread up as i would like to know as well.
Cheers
CK500

[DustyC]

I can.....hang on

[DustyC]

Tada!
www.pistonheads.com/gassing/topic.asp?t=96921&f=9&h=0&hw=glue


Let me know how you get on. I need to do it too.

[Big Al.]

Do a search in the Griff forum, using heat shielding.

Found this

www.pistonheads.com/gassing/topic.asp?t=50492&f=9&h=0&hw=heat+shielding

[DustyC]

Yet again the Griff beats the Chim!


BTW: Al, Got the Griff on to Goodwood fine. Measured in at 95dbs at 4500 on the day thankfully.

[Big Al.]

Your too hasty ,and if your too hasty you don't get no where!



Did you have a good time @ GW?

[DustyC]

Big Al. said:

Did you have a good time @ GW?

Quite good.

Actually...best bloody driving experience ever! I could do it every day and Id never get bored.
Until Bridgestone or Dunlop start sponsoring me though I'll be limiting it somewhat!

[crimson king 500]

Cheers guys, thanks for the tips.
CK500

[DustyC]

No worries.

[Big Al.]

Pleasure.

[martinworth]

Thanks everyone. Doing the sticking today now the sun is out and the bonnet is off.

[SteveGRF]

Forget glue, look on the RS Components web site, buy some industrial strengh double sided tape. Used on mine about 12 months ago still holding strong. This stuff is high temp resistant etc, the best way to fit it is to remove the bonnet turn it over, apply the tape, refix liner - job done. If your'll ever in the middx / Uxbridge area, Ive got some spare :-)

[s_i_hunter]

I stuck my bonnet liner down with contact adhesive. Stuck like S**t to a blanket.

Not moved since.

Easy to get and easy to apply.