Retrofitting cruise control to a 1 series
Discussion
Just finished retrofitting cruise to our 130i, the mechanical bit is pretty straight forward although a bit fiddly.
Parts wise you'll be lucky to get much change out of £400 for new parts-even with a bit of discount (thats for the steering wheel switch unit (aka the slip ring) and the lower part of the steering column trim. Second hand parts are availalbe infrequently but are a bit of a minefield as it depends on some of the specific options on the car already and those from the donor vehicle matching.
Also you'll need the car reprogramming once fitted as the CC wont work, nor will the stability managment and a number of other systems which need to be calibrated, the re-prog should only take an hour but the dealer had to open a PuMa case to sort ours out, so they normally estimate 2hrs work (about another £240 at my local dealer)
Overall worth doing but not without issues- drop me a PM if you get any further into wanting to do it.
Parts wise you'll be lucky to get much change out of £400 for new parts-even with a bit of discount (thats for the steering wheel switch unit (aka the slip ring) and the lower part of the steering column trim. Second hand parts are availalbe infrequently but are a bit of a minefield as it depends on some of the specific options on the car already and those from the donor vehicle matching.
Also you'll need the car reprogramming once fitted as the CC wont work, nor will the stability managment and a number of other systems which need to be calibrated, the re-prog should only take an hour but the dealer had to open a PuMa case to sort ours out, so they normally estimate 2hrs work (about another £240 at my local dealer)
Overall worth doing but not without issues- drop me a PM if you get any further into wanting to do it.
Thanks for the replies chaps. I decided against looking at the car without cc as it was a 3dr and slightly higher miles for the year.
I now know its possible to have it fitted though so its good to know for other cars.
Would the programming have to be done at a main dealer? There is a BMW specialist near me and they would obviously be cheaper if its something they can do.
I now know its possible to have it fitted though so its good to know for other cars.
Would the programming have to be done at a main dealer? There is a BMW specialist near me and they would obviously be cheaper if its something they can do.
You can do it on the cheap. You need 2 parts to complete the conversion, the slip ring and the casing below the steering wheel (not sure what its called) the casing is only about £25 and the slip rings can be found on ebay for ~£60. Although as mentioned above you need a specific slip ring so you could be waiting a while as they are different for cars with a multi-function steering wheel.
If you are doing the converstion you want you car booked in at BMW before, as again mentioned above lots of functionality is lost (steering wheel won't self center, indicators won't auto cancel and TCS problems) but I can't see why BMW would charge £240
its a 20min job to update the code... Should cost £60 max.
Theres a couple of brilliant guides on babybmw.net.
If you are doing the converstion you want you car booked in at BMW before, as again mentioned above lots of functionality is lost (steering wheel won't self center, indicators won't auto cancel and TCS problems) but I can't see why BMW would charge £240
its a 20min job to update the code... Should cost £60 max.Theres a couple of brilliant guides on babybmw.net.
Gassing Station | BMW General | Top of Page | What's New | My Stuff


