Torque settings

[SILICONEKID340HP]

Anyone know the torque setting for the clutch cheers

[carsy]

http://www.pistonheads.com/gassing/topic.asp?t=107...

[haircutmike]

Torque settings
1-4 Main bearing cap bolts - 55 lbft
Rear main bearing cap (5) - 70 lbft
Conrod cap nuts - 35 lbft
Long and medium cylinder head bolts - 70lbft (all heads)
Short cylinder head bolts - omit or 30lbft (except 10 bolt heads)
Rocker pedestal bolts - 25 lbft
Timing cover bolts - 25 lbft
Crankshaft pulley bolt - 150 lbft
Camshaft timing gear bolt - 45 lbft
Valley gasket clamp bolts - 10 lbft
Flywheel/drive plate bolts - 60 lbft
Clutch cover bolts - 35 lbft
Inlet manifold bolts - 30 lbft (Disclaimer: At least 1 person has pulled the thread out at this setting - although LR claim it should be at 38ft-lb - so YMMV)
Exhaust manifold bolts - 15 lbft
All 1/4" bolts - 8 lbft
All remaining 5/16" bolts - 20 lbft

[SILICONEKID340HP]

Cheers