Maser 3200 GT engine wanted
Maser 3200 GT engine wanted
Author
Discussion

Richkid

Original Poster:

19 posts

177 months

Thursday 24th May 2012
quotequote all
Any one know of a reasonable engine (not in Ireland). Had my 3200 serviced end of Jan (1000 miles ago) with new cambelt, followers, tensioner and oil pump, we suspect they missed the water pump was on the way out, charged me £2k and I now have a tatered engine! They are claiming 'not our fault', having a report done to find out if they should have known, either way want to be back on the road ASAP, missing the old gal!
Richkid

TISPKJ

3,780 posts

238 months

Thursday 24th May 2012
quotequote all
Try this crew matey ..... no connection to them.

Obviously you know this wont be a cheap fix.

http://www.eurospares.co.uk/breaking2.asp?page=112

AndrewW-G

11,968 posts

248 months

Thursday 24th May 2012
quotequote all
Other option, is to keep an eye on the salvage auctions for a car that’s cat B or C. Copart had IIRC a rolled 3200 last week.

Either way, hope you get it sorted soon smile

Richkid

Original Poster:

19 posts

177 months

Thursday 24th May 2012
quotequote all
Thanks Andrew, really want similar or less miles, it had only done 34k, engine should have been good for another 100k if service done right! A bit risky to drop in a high milage 2nd hand lump, suspect it would be even less reliable. Have the option od a rebuild but all advice is that it will be more expensive than new engine!

AndrewW-G

11,968 posts

248 months

Thursday 24th May 2012
quotequote all
Richkid said:
Thanks Andrew, really want similar or less miles, it had only done 34k, engine should have been good for another 100k if service done right! A bit risky to drop in a high milage 2nd hand lump, suspect it would be even less reliable. Have the option od a rebuild but all advice is that it will be more expensive than new engine!
What damage is there?

Are we talking a few bent valves, or KABOOOM followed by the tinkle of parts boucing off the road?

If its the former, rebuild it and get all the little jobs done whilst its out . . .net result will still be a large bill, but with a car that will keep going for years

Richkid

Original Poster:

19 posts

177 months

Thursday 24th May 2012
quotequote all
It's the unknown bits which are scary, all valves are likely to be bent, though only going slow engine turned for a minute or so before stopping but there may be damage to pistons which it is said can't be easily spotted, the parts are stupidly expensive for what are now cheap cars. Got it with a local indipendant specialist and they seem dead straight, they could have just started work on it and charged me, they seem to be trying to find the most cost effective way forward, I'm going to make a warranty claim against the garage who did the cambelt work when I know for sure it was their fault.

Pork

9,455 posts

265 months

Thursday 24th May 2012
quotequote all
I'd give David Askew a call.....nice guy and if he can't help, will probably know who can.

http://www.davidaskew.co.uk/

Good luck getting it sorted.

911944

186 posts

187 months

Friday 25th May 2012
quotequote all
Who did the belt? A Maserati/ Ferrari specialist or just a general garage?

robseagul

344 posts

244 months

Saturday 26th May 2012
quotequote all
I have a engine for you here.i just crashed my 3200 with 73 on the clock after an incident with traction control off and a lamppost .its a great engine and a great price.give me a shout on 07967374977.cheers. Rob

Richkid

Original Poster:

19 posts

177 months

Sunday 27th May 2012
quotequote all
an Alfa Fiat specialist who said they could do it, not sure in hind sight they could, may just have been unlucky though.

raceboy

13,943 posts

311 months

Tuesday 12th June 2012
quotequote all
Sorry to hear it's this bad mate, hope you can get it sorted. frown