External differences between 3.6 and 4.0 engines
External differences between 3.6 and 4.0 engines
Author
Discussion

jmn

Original Poster:

1,107 posts

302 months

Sunday 27th May 2012
quotequote all
'I have seen a 2004 Tamora advertised, and the owner states that TVR Power have told him that 'it may be a 4.0, or even a red rose, because TVR would put in whatever engine was available at the time'.
This sounds a bit unusual-are there any external distinguishing features between the different engines?'

I posted this question in the 'Speed 6 Engine' section-would anybody be able to help if I obtained the VIN?

kcc

339 posts

227 months

Monday 28th May 2012
quotequote all
Not too sure but i think factory 4.0 ltr engines had the cam cover painted red, not much of a help as a lot of owners have now gone the same route, and not only red. i would trust Dom on this one, but a session on the rollers should give you the answer.

Mattt

16,664 posts

240 months

Monday 28th May 2012
quotequote all
Engine number should confirm if original surely? It will either say '36' or '40' in it I thought?

7 TVR

2,589 posts

190 months

Monday 28th May 2012
quotequote all
Measuring the crank is your only option me thinks!!

TVR_owner

3,349 posts

213 months

Monday 28th May 2012
quotequote all
Drive it back to back with a known 3.6. Difference is obvious.

TVR_owner

3,349 posts

213 months

Monday 28th May 2012
quotequote all
Mattt said:
Engine number should confirm if original surely? It will either say '36' or '40' in it I thought?
Engine no and Vin will say 3.6 probably. Build sheet would help if it was built as a special.

duff-man

633 posts

228 months

Monday 28th May 2012
quotequote all
Pull a spark plug and measure the stroke.