Is it worth undersealing a brand new car?
Discussion
Recently bought a Skoda Superb (new). Its a month old today and I'm still quite taken with it and would like to keep it long term and later on buy another car for fun. Is it worth spending time undersealing it to safeguard against the salt and possibly bad winters in the future or is it a silly idea?
Cemesis said:
Having had BMW's and with rust starting to appear around 5-6 years, I've become abit paranoid. The Superb does have a 12 year anti-perforation warranty and I was abit afraid of voiding any warranty so I'll leave it.
Appreciate the advice.
Don't worry, Skodas are better than BMWs.Appreciate the advice.
Check the conditions of your warranty before doing anything, as suggested above, but don't be so quick to dismiss the idea.
Admittedly, my car isn't galvanised, but I've had a significant amount of clear waxoyl applied to the underside/engine bay/wheelarches of my car to prevent this.
If you're planning on keeping the car for a decade, it might well be showing signs of corrosion at that time, and a perforation warranty won't cover it as they only cover corrosion from the inside out. Wheelarch bubbling etc will be classified as damage due to things like salt/stone chips, and so you'll be on your own. Also, you don't want your car to rust at all, nevermind worrying about warranty repairs.
I wouldn't use an underseal though. You could mask possible problems. Keep to clear products so you can assess changes.
Admittedly, my car isn't galvanised, but I've had a significant amount of clear waxoyl applied to the underside/engine bay/wheelarches of my car to prevent this.
If you're planning on keeping the car for a decade, it might well be showing signs of corrosion at that time, and a perforation warranty won't cover it as they only cover corrosion from the inside out. Wheelarch bubbling etc will be classified as damage due to things like salt/stone chips, and so you'll be on your own. Also, you don't want your car to rust at all, nevermind worrying about warranty repairs.
I wouldn't use an underseal though. You could mask possible problems. Keep to clear products so you can assess changes.
Eighteeteewhy said:
If you are seriously thinking about keeping it for 10+ years it's a great idea.
Don't use Waxoyl though, there are far superior products out there. Dinotrol for example.
Or Bilt Hamber as well. I used the clear coat treatment (UC) on my Z3 after a good clean up first and you can hardly tell it's there so it would be easy to see if there is any change.Don't use Waxoyl though, there are far superior products out there. Dinotrol for example.

Have a look here OP, even give them a bell and explain what you're doing. I found them very helpful and friendly service.
http://www.dinitrol.co.uk/
http://www.dinitrol.co.uk/
Edited by Eighteeteewhy on Sunday 27th May 22:11
Cemesis said:
Have you sprayed that under the car upto and on the sills? How much did you need to do a Z3?
It's an ongoing project. I took the offside wheel arch liners and the sill 'cover' off over Easter. I bought two 750mL cans but still haven't used all the first one (it's better to spray it on thinly according to BH). I sprayed the inside of the cover sill as well as the actual sill. I will do the nearside at some point, but now the weather has improved I've been wanting it available to drive. I'll probably do the exposed part of the floor pans underneath too, but I'll see how the first two cans go before ordering more. The Z3 is galvanised, but there are still some areas that can be prone to rusting, hence my ongoing 'improvement project'.I cleaned it all with diluted Bilt Hamber 'Surfex HD' first which does a good job lifting grease and general dirt. No before pictures, so I'll have to take some of the nearside when I do it.
http://www.bilthamber.com//search-products.php?cna... Prevention
Some pictures of the work and to give an idea of what the clear UC looks like on the final wheelarch picture:
The brown 'dribbles' were there when I took the sill cover off, not BH product maybe just delivery wax that got inside?
Edited by OldSkoolRS on Sunday 27th May 22:03
Edited by OldSkoolRS on Sunday 27th May 22:05
I have never done it to a new car, but I always give any rust prone areas a coat of Cavity Wax in any vulnerable area, like over the wheel arches on BMWs. thin it down well.
I also use ACF-50 to coat the engine bay, as this really does keep the engine bay looking like new. I spray everything with it, even the alloy on the gearbox and engine. I apply a spray every year. works great on motorcycles as well, lots of bikers use it.
7 year old Caterham

10 year old Honda - 150K miles

14 year old Corolla

I also use ACF-50 to coat the engine bay, as this really does keep the engine bay looking like new. I spray everything with it, even the alloy on the gearbox and engine. I apply a spray every year. works great on motorcycles as well, lots of bikers use it.
7 year old Caterham
10 year old Honda - 150K miles
14 year old Corolla
5 USA said:
This thread is surely a joke!
Unless you've bought a "new" car built by Fiat or BL in the 1970s....
Unless you've bought a "new" car built by Fiat or BL in the 1970s....
- generic PH reply on*
HOW DARE YOU!
is it on finance? no need to underseal it your loosing all that money might as well bend over nowit
- Generic Ph reply off *
okie592 said:
5 USA said:
This thread is surely a joke!
Unless you've bought a "new" car built by Fiat or BL in the 1970s....
Unless you've bought a "new" car built by Fiat or BL in the 1970s....
- generic PH reply on*
HOW DARE YOU!
is it on finance? no need to underseal it
- Generic Ph reply off *

Resurrecting an old thread as it was the first one that popped up on a Google search.
I plan on doing this with my new Duster when it arrives in March/April. I'm hoping to keep it long term, it's the first and almost certainly only new car I'll buy in my lifetime and the prospect of being able to properly seal it from the moisture and salt while it's perfectly clean appeals rather than in 5 years when surface corrosion has already started.
I'm not sure if it would void the warranty although I'm not that bothered I don't intend to let the dealer touch it anyway, I'd be surprised if they even noticed Bilthamber UC anyway.
Only dilemma is whether to use Bilthamber products or go all out and use epoxy paint, or a combination of both.
Also plan on using ACF50 over the engine bay, my transporter had metal clips and brackets that disintegrated in my hands due to corrosion at less than 10 years old.
I plan on doing this with my new Duster when it arrives in March/April. I'm hoping to keep it long term, it's the first and almost certainly only new car I'll buy in my lifetime and the prospect of being able to properly seal it from the moisture and salt while it's perfectly clean appeals rather than in 5 years when surface corrosion has already started.
I'm not sure if it would void the warranty although I'm not that bothered I don't intend to let the dealer touch it anyway, I'd be surprised if they even noticed Bilthamber UC anyway.
Only dilemma is whether to use Bilthamber products or go all out and use epoxy paint, or a combination of both.
Also plan on using ACF50 over the engine bay, my transporter had metal clips and brackets that disintegrated in my hands due to corrosion at less than 10 years old.
ChocolateFrog said:
Resurrecting an old thread as it was the first one that popped up on a Google search.
I plan on doing this with my new Duster when it arrives in March/April. I'm hoping to keep it long term, it's the first and almost certainly only new car I'll buy in my lifetime and the prospect of being able to properly seal it from the moisture and salt while it's perfectly clean appeals rather than in 5 years when surface corrosion has already started.
I'm not sure if it would void the warranty although I'm not that bothered I don't intend to let the dealer touch it anyway, I'd be surprised if they even noticed Bilthamber UC anyway.
Only dilemma is whether to use Bilthamber products or go all out and use epoxy paint, or a combination of both.
Also plan on using ACF50 over the engine bay, my transporter had metal clips and brackets that disintegrated in my hands due to corrosion at less than 10 years old.
epoxy paint/primer would only show any benefits if the area was stripped to bare metal ...cant put a hat on a hatI plan on doing this with my new Duster when it arrives in March/April. I'm hoping to keep it long term, it's the first and almost certainly only new car I'll buy in my lifetime and the prospect of being able to properly seal it from the moisture and salt while it's perfectly clean appeals rather than in 5 years when surface corrosion has already started.
I'm not sure if it would void the warranty although I'm not that bothered I don't intend to let the dealer touch it anyway, I'd be surprised if they even noticed Bilthamber UC anyway.
Only dilemma is whether to use Bilthamber products or go all out and use epoxy paint, or a combination of both.
Also plan on using ACF50 over the engine bay, my transporter had metal clips and brackets that disintegrated in my hands due to corrosion at less than 10 years old.
go with a decent quality cavity wax and then a proper underbody wash and inspection after each winter
A friend had his brand new Ford Ranger pick up dinitrol coated to protect it.
He works in forestry commission so the truck sees a lot of off road and gravel road use.
They had the truck a week to make sure everything was done correctly.
They usually do an annual check up but for his use of the truck they do it every 6 months.
Personally, I would get it done for peace of mind.
I’ll have my cars treated by the company my mate used to keep them good for longer.
He works in forestry commission so the truck sees a lot of off road and gravel road use.
They had the truck a week to make sure everything was done correctly.
They usually do an annual check up but for his use of the truck they do it every 6 months.
Personally, I would get it done for peace of mind.
I’ll have my cars treated by the company my mate used to keep them good for longer.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


