Windscreen - Help !!
Windscreen - Help !!
Author
Discussion

GR1FF1F

Original Poster:

523 posts

265 months

Tuesday 29th May 2012
quotequote all
Short summary. Had my 360 Spider one month, suffered a large stone direct hit on the windscreen first time out in it. Insurance co directed me to a well known car window fitter, who are having difficulty getting a replacement screen to fit. Glass goes in OK, but then the wiper arm apparently catches on activation. They have now tried three screens, all with the same problem.

On the off chance, has anyone experienced an issue like this ? Is it bad screens, poor refitting of the wipers ?

Getting frustrated as I'm missing all the good weather. Probably get it back and we'll be back to rain and misery frown

V10 BAT

1,718 posts

265 months

Wednesday 30th May 2012
quotequote all
Hi
Had to replace my Gallardo screen june ish last year AUTO GLASS were great ,had the choice of
Lambo or non oem screen if i wanted it quick.
Went with the genuine lambo screen.I think the copy would have been more than ok but dont know .

Sounds like the screens are not quite right pattern / shape wise.
Can you ask them to fit a genuine screen.
Pita but it will get sorted mate.
cheers.


GR1FF1F

Original Poster:

523 posts

265 months

Wednesday 30th May 2012
quotequote all
Thanks, they are using genuine Ferrari screens, but seems there must minor shaping inconsistencies. Spoke to my dealer this morning and they advised that when fitting screens the wiper arms and motor might require shims to be fitted in order to space the sweep from the screen surface. Fine tolerances invovled evidently.

voicey

2,494 posts

218 months

Wednesday 30th May 2012
quotequote all
Where is the wiper arm catching? I'm struggling to visualise the problem as the arm is sprung. The motor and mechanism sit under the scuttle below the windscreen so I really can't see how they'd be a problem.

If the arm is catching on the bonnet then it's a common problem and cured by heating the arm and bending it back (after taking your brave pills).

GR1FF1F

Original Poster:

523 posts

265 months

Wednesday 30th May 2012
quotequote all
Believe me I'm not going to be bending anything so will not be needing the brave pills. Leaving this strictly to the techies. However, I'm hearing from them that it's the additional stay, which reinforces the wiper arm, which is just scraping the surface of the glass as it sweeps

GR1FF1F

Original Poster:

523 posts

265 months

Thursday 31st May 2012
quotequote all
Anyone have a sense of the extent to which the recent earthquake has affected (or will) the supply of spares from Italy. Heard that my wiper has been broken in the course of screen fitting and now awaiting a spare part from Italy, as none available in the UK frown

marky1

1,094 posts

227 months

Thursday 31st May 2012
quotequote all
I had the same issue on a 360 M once. Think they just bended the wiper arm a tiny bit and that sorted it.

GR1FF1F

Original Poster:

523 posts

265 months

Thursday 31st May 2012
quotequote all
Cheers Mark, sounds like they bent mine just a wee bit too much frown

Had heard, however, that this is a regular problem with 360 screens. Just gotta know how to sort it out

screengenie

5 posts

181 months

Thursday 7th June 2012
quotequote all
If i remember correctly the stabiliser stay is fixed with either a 8 or 10mm nut, if it is only just catching the glass fit a washer/shim underneath the arm to raise it slightly off of the glass.

If all of the original urethane ( glue ) was not cut back when the screen was removed and when the new urethane was applid it may be sitting too high..


indipendant

14 posts

184 months

Thursday 7th June 2012
quotequote all
Hi, on the 360 the main drive wiper has a securing plate that attaches to the bulkhead, this in turn is held on with a hex bolt, a common mistake on refitment is to fully tighten this hex bolt, when originally they are tightend by hand with blue loctite on the thread, if this hex bolt is over tightened it will lower the stance of the base of the wiper arm, dragging it over the windscreen.

Andy

GR1FF1F

Original Poster:

523 posts

265 months

Friday 8th June 2012
quotequote all
Many thanks for your input guys, I wish I had posted this up earlier and then maybe the problem could have been resolved before the damage occurred. As it stands currently, the car, which was originally dropped off at the well-known screen fitting co almost 4 weeks ago, is due to be collected and taken to a Ferrari dealer who will remediate the problem.
banghead

Pretty sure that the glass co rue the day they every set eyes on the car, and the insurance company are also bearing additional costs. I just hope it can be fixed before I'm due to head off to LM next Friday. Almost forgotten what it feels like to drive it
grumpy

Glassman

25,105 posts

246 months

Friday 29th June 2012
quotequote all
GR1FF1F said:
I just hope it can be fixed before I'm due to head off to LM next Friday.
scratchchin