F430 ride height
Discussion
The ride height of my 430 spider is slightly too low. I have been told by a local main dealer that raising the ride height is a big job, involves removing the suspension. Is that right? I had the ride height on my old Maserati 4200 adjusted several years ago, and it was fairly straight forward. Anyone know what's involved?
Cheers
Cheers
My car is so low that in race mode the front scrapes on the road sometimes when cornering fast. Not entirely sure if I am going to adjust it yet as the lower ride height makes the car look so much better than the standard setup. I can remember when I got the masser done it was just a matter of winding a cog around the suspension arms, didn't take long. Prob about 20 mins per side.
P101 said:
My car is so low that in race mode the front scrapes on the road sometimes when cornering fast. Not entirely sure if I am going to adjust it yet as the lower ride height makes the car look so much better than the standard setup. I can remember when I got the masser done it was just a matter of winding a cog around the suspension arms, didn't take long. Prob about 20 mins per side.

bertie said:
All this talk of reducing ride heights, it effects so many elements of the geo, toe, camber, bump steer, and not getting the right front to back rake makes a massive difference.
It can really screw up the handling.
Which are you interested in, handling or looks?
A little bit of both. I feel as standard the 430 is too high. I don't like the big gaps in the wheel arch's.It can really screw up the handling.
Which are you interested in, handling or looks?
P101 said:
A little bit of both. I feel as standard the 430 is too high. I don't like the big gaps in the wheel arch's.

I presume that is after lowering?As has been said before, if you want it to handle get a full geometry setup done at somewhere like http://www.centergravity.co.uk/
With the ammount of go an F430 has I think it's dangerous not to.
bertie said:
All this talk of reducing ride heights, it effects so many elements of the geo, toe, camber, bump steer, and not getting the right front to back rake makes a massive difference.
It can really screw up the handling.
Which are you interested in, handling or looks?
I think most people would already know this, hence me suggesting that once the ride height has been adjusted to get a decent geo setup done. These cars IMPROVE hugely with a slight lower and a proper geo setup, there is no downside.It can really screw up the handling.
Which are you interested in, handling or looks?
UH-Matt said:
I think most people would already know this, hence me suggesting that once the ride height has been adjusted to get a decent geo setup done. These cars IMPROVE hugely with a slight lower and a proper geo setup, there is no downside.
As you say a slight reduction with a proper geo might improve it, but it'll be the proper geo that's making the improvement, not the ride height.I just worry about people slamming them to the ground and buggering the geo, seen it done before.
To avoid the scrapping you need to put stiffer springs in. If you drive it hard alot, you'll make a complete mess of that bumper.
Various options .... Novatech do a progressive spring setup which I have heard is very good (and not ridiculously expensive) and keeps the characteristics of the car pretty much similar. Other alternatives I have heard is to use Scud springs but the Titanium versions are $$$.
Various options .... Novatech do a progressive spring setup which I have heard is very good (and not ridiculously expensive) and keeps the characteristics of the car pretty much similar. Other alternatives I have heard is to use Scud springs but the Titanium versions are $$$.
This is an easy job. Get it down to qv london, they have done loads of them. A quick geo is of course required afterward. Scud height is the sensible option, -20 and -15 IIRC. Fit the cheaper non titanium scud springs if you want a stiffer ride as well. The springs rates in the stock 430 are fairly plush to say the least.
jackal said:
This is an easy job. Get it down to qv london, they have done loads of them. A quick geo is of course required afterward. Scud height is the sensible option, -20 and -15 IIRC. Fit the cheaper non titanium scud springs if you want a stiffer ride as well. The springs rates in the stock 430 are fairly plush to say the least.
Have you bought one yet? 
I bought the car already lowered by someone else. I have noticed that it scrapes more when I have a passenger. I guess it must be the extra weight. The cars going back to Autofficina who I purchased it from to have some other niggles sorted out, I think I may get them to raise the suspension a little. Also get some scuff guards fitted.
Gassing Station | Supercar General | Top of Page | What's New | My Stuff



