T350t targa roof panel seal

[TVR Tommy]

Does anyone know where I can purchase a seal like this?



RG sell it, but there is no way I'm paying £21 per metre for a seal.

Thanks

[sidpinup]

I did mine recently, door loop, boot and targa seals from these guys. http://www.sealsdirect.co.uk very good prices.

[sanquin]

sidpinup said:

I did mine recently, door loop, boot and targa seals from these guys. http://www.sealsdirect.co.uk very good prices.

Did they provide the targa panel seal the same as the original like Tommy displays? The ones the go around the panel edges? And if so, was it custom made or did they have it in stock? I asked for custom making the seal and that would be like 200pounds for 20m, which was the minimum order.

I bought the targa seal from Racetech Direct http://www.racetechdirect.co.uk/tvr-car-parts-subs... and it is as it says just a P seal that does not go around the edges. Although optically better, it does not offer protection to the edges and I would also like to get (something similar to) the original panel seal as Tommy displays.

[sidpinup]

sanquin said:

Did they provide the targa panel seal the same as the original like Tommy displays? The ones the go around the panel edges? And if so, was it custom made or did they have it in stock? I asked for custom making the seal and that would be like 200pounds for 20m, which was the minimum order.

I bought the targa seal from Racetech Direct http://www.racetechdirect.co.uk/tvr-car-parts-subs... and it is as it says just a P seal that does not go around the edges. Although optically better, it does not offer protection to the edges and I would also like to get (something similar to) the original panel seal as Tommy displays.

I don't know and I have a Tamora not T350 so you will have to look and see what they do. I do know that I found everything I needed for the , door/roof loop, boot seal and the funny seal on sides of the roof section.

[sanquin]

I didn't find the T350 roof panel seal

I had a topic about this a few months ago and then nobody came up with a supplier of a seal similar to the original. If there are enough people interested we could have it custom made. With 5 people interested it would be like 40 pounds for two panel seals excl shipping.

[MattT350T]

Must admit that I bought and used the Racetech seal. However I stuck it on the existing seal. It improved the speed at which the initial wind roar started from about 80 to almost 120mph. Much quieter and cheaper!