Electric windows question

[ralphy12345]

Background: when my passenger door window is fully up it sits just fine under the targa seal and when the door is opened/closed all is well.
However, the driver’s door window hits the rubber seal on closing and crushes it inwards, causing water ingress :-(. Comparing the two windows, the driver’s one rises above the window guide whereas the passenger’s stops at the same height.

So the question is: how/can I adjust the point the driver’s window stops rising to???

Ta.

R

[blaze_away]

According to the bible there is an adjuster half way along the door top on the outside of the glass about 1/2 inch below the rubber seal. I know this but have no idea how you actually get a screw driver on to it to actually do the adjustment, I look forward to someone posting an experience based reply for both of us.

I need to adjust mine up a little on passenger side.

[miniman]

You just have to rummage around in the "brush" at the top of the door, it's a Phillips screw IIRC.

[ralphy12345]

miniman said:

You just have to rummage around in the "brush" at the top of the door, it's a Phillips screw IIRC.

I’ll have a look when it stops p***ing down, but how does this actually work in stopping the window?

R

[ralphy12345]

EDIT: I’ve found the info in the ‘Bible’: missed it the first time I referred to the book!

R