Help! Tag Calibre has gone wrong!
Discussion
Dav_s said:
My Tag Calibre S (3 years old) has gone wrong - hour hand not correctly aligned, chrono mode a real mess!
Can anyone please recommend someone who'd be able to put it right in or around the west London or Berks/Bucks area?
Thanks
Hi Dave, Can anyone please recommend someone who'd be able to put it right in or around the west London or Berks/Bucks area?
Thanks
I had one of these that did that. If you read (or re-read in my case) the instructions, there is a passage about re-synching the chrono and setting the time. Mine was fine afterwards...Good luck!
D
You've probably found it already but internet says:
Set to time mode.
Hold down A and B buttons for about 2 seconds until you see the chrono reset to zero.
Now you can set the hour hand manually to zero by hitting A. Hit B to move on to minutes hand (and then set this to zero manually by hitting A). Hit B to move to seconds and repeat if necessary.
Go back to Time mode again by pushing on the crown.
Did it help?
Set to time mode.
Hold down A and B buttons for about 2 seconds until you see the chrono reset to zero.
Now you can set the hour hand manually to zero by hitting A. Hit B to move on to minutes hand (and then set this to zero manually by hitting A). Hit B to move to seconds and repeat if necessary.
Go back to Time mode again by pushing on the crown.
Did it help?
Gassing Station | Watches | Top of Page | What's New | My Stuff



