Z3 - what are they like?
Discussion
I've got a hankering for a new toy at the moment and I've just noticed that the 2.8 Z3 is very good value. However, I've never thought as them as very good. What are they like? It'd be used as a weekend play thing and maybe 1 or 2 trackdays a year. I don't want something too track focused as I don't want to compromise on it being used as a soft top plaything.
I'm still on the fence about them and I they will be fun / eventful enough to have as a toy. I've run a Boxster S in the past, so that's a point of reference if anybody knows them.
I'm still on the fence about them and I they will be fun / eventful enough to have as a toy. I've run a Boxster S in the past, so that's a point of reference if anybody knows them.
I loved it, but the handling needed a lot of work to get it up to scratch to being a fully enjoyable car.
Probably needed new bushes and tyres, however, not long after it being gone we test drove a Z3M, which handled amazingly better.
So I put it down to the very different set up the cars had.
I love the z3, but the z4 is so much more drivable that I don't think I could go back
Everything else I loved about it.
Probably needed new bushes and tyres, however, not long after it being gone we test drove a Z3M, which handled amazingly better.
So I put it down to the very different set up the cars had.
I love the z3, but the z4 is so much more drivable that I don't think I could go back
Everything else I loved about it.
Your best asking the question on ZRoadster.net or .org
Remember the Z3 is getting on a bit now, even when new it was so don't expect miracles. Its better built than the 1st generation Z4 but not as refined but more importantly more characterful. Theyre great value at the moment and so much better than an MX5.
Had my Z3 4 years and enjoyed every minute and still do even though I just bought an E89 Z4.
Remember the Z3 is getting on a bit now, even when new it was so don't expect miracles. Its better built than the 1st generation Z4 but not as refined but more importantly more characterful. Theyre great value at the moment and so much better than an MX5.
Had my Z3 4 years and enjoyed every minute and still do even though I just bought an E89 Z4.
I'm aware they are getting on a bit at the moment, so I'm not expecting anything amazing. However, the idea of a nice straight six, RWD and a soft top for around the £3k mark seems quite nice.
From the reading I've done there seem to be plenty of upgrades that you can apply to sharpen things up a little if needed.
From the reading I've done there seem to be plenty of upgrades that you can apply to sharpen things up a little if needed.
StuB said:
Are you really up to the hairdresser comments? Great value & 2.8's can be entertaining. As said, one with upgrades will cost similar money and be more enjoyable than stock. £3k should get a decent example.
I really couldn't give a damn what other people think...I'm keeping my eye out for one with a few tweaks already.
Where are you based? I'm Sussex and if you're near you're welcome to have a blast in mine (2.8).
I've written quite a lot about it now in my garage blog, so won't bang on here (the "Z3 Specific" thread also has a few of us raving on about them!) but it's great.
The prices are actually dropping too. I paid under £2k for mine and it was a bargain at the time, but 2.8s now seem to be dropping into this range anyway. You won't even need to spend the whole extra £1k getting it upgraded.
A full poly bush set is under £200, front strut brace varies but find an ebay one for c.£80, M50 manifold £50-100 (haven't bought one yet but again been watching ebay). OEM suspension parts, even if you go for the M3 versions, are dirt cheap, and things like brake bits are really reasonable from EuroCarParts.
Update us when you buy, I read quite a lot of slating in GG here on PH about them at one point, but luckily already owned mine and felt a bit like I was in on a well kept secret
Yes, it is a bit soft, but that straight six lump is glorious and it's amazing fun to drive at silly cheap prices 
Edit to add the main thread: http://www.pistonheads.com/gassing/topic.asp?h=0&a...
I've written quite a lot about it now in my garage blog, so won't bang on here (the "Z3 Specific" thread also has a few of us raving on about them!) but it's great.
The prices are actually dropping too. I paid under £2k for mine and it was a bargain at the time, but 2.8s now seem to be dropping into this range anyway. You won't even need to spend the whole extra £1k getting it upgraded.
A full poly bush set is under £200, front strut brace varies but find an ebay one for c.£80, M50 manifold £50-100 (haven't bought one yet but again been watching ebay). OEM suspension parts, even if you go for the M3 versions, are dirt cheap, and things like brake bits are really reasonable from EuroCarParts.
Update us when you buy, I read quite a lot of slating in GG here on PH about them at one point, but luckily already owned mine and felt a bit like I was in on a well kept secret
Yes, it is a bit soft, but that straight six lump is glorious and it's amazing fun to drive at silly cheap prices 
Edit to add the main thread: http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Edited by FLGirl on Wednesday 27th June 07:22
theboyfold said:
Thanks, I'm out in Berks I will try and find one local to here to have a look at. The links and suggestions are useful, the upgrades sound quite good value as well.
I'm just outside Wokingham: You'd be welcome to come out for a run in my 3.0, which is only a little bit quicker than a 2.8 in practice (and supposedly slightly more economical).I drove a couple of 2.8s when I was looking for mine and there isn't much different to be honest. I've had mine since the end of February and prices have continued to fall, so as usual I paid more than I should have done...I've done a few jobs/upgrades on it too: I bought a used strut brace for £75 off ZRoadster.net classifieds. I've replaced the front wishbone rear bushes (known weak point) with Powerflex poly ones and replaced the drop links with new OEM ones. This has improved the feel of the car though I have yet to replace the strut mounts (the NS has a slight clunk) and may replace the wishbones themselves for piece of mind. I'm a competent DIY mechanic and found everything very easy to work on. I've also bought the INPA software and cable which helped diagnose a failed exhaust camshaft sensor, which made quite a difference to the low end power once replaced.
Get used to the hairdresser comments, but it sounds like me that you just drive what you like anyway.

OldSkoolRS said:
I'm just outside Wokingham: You'd be welcome to come out for a run in my 3.0, which is only a little bit quicker than a 2.8 in practice (and supposedly slightly more economical).I drove a couple of 2.8s when I was looking for mine and there isn't much different to be honest. I've had mine since the end of February and prices have continued to fall, so as usual I paid more than I should have done...
I've done a few jobs/upgrades on it too: I bought a used strut brace for £75 off ZRoadster.net classifieds. I've replaced the front wishbone rear bushes (known weak point) with Powerflex poly ones and replaced the drop links with new OEM ones. This has improved the feel of the car though I have yet to replace the strut mounts (the NS has a slight clunk) and may replace the wishbones themselves for piece of mind. I'm a competent DIY mechanic and found everything very easy to work on. I've also bought the INPA software and cable which helped diagnose a failed exhaust camshaft sensor, which made quite a difference to the low end power once replaced.
Get used to the hairdresser comments, but it sounds like me that you just drive what you like anyway.
I'm glad it's not just me who does that (bold comment)!I've done a few jobs/upgrades on it too: I bought a used strut brace for £75 off ZRoadster.net classifieds. I've replaced the front wishbone rear bushes (known weak point) with Powerflex poly ones and replaced the drop links with new OEM ones. This has improved the feel of the car though I have yet to replace the strut mounts (the NS has a slight clunk) and may replace the wishbones themselves for piece of mind. I'm a competent DIY mechanic and found everything very easy to work on. I've also bought the INPA software and cable which helped diagnose a failed exhaust camshaft sensor, which made quite a difference to the low end power once replaced.
Get used to the hairdresser comments, but it sounds like me that you just drive what you like anyway.

I'm not a competent mechanic, but I know a man who is and who is quite good value
So I'm not to worried about that. I might take you up on your offer, I'm in the PH enclave of Twyford (there are loads of us here!).As for the hairdressers comment, I drove a red :O Boxster for about 5 years, so I don't care too much what others think.
I sometimes have a bit of blast over to Twyford. In fact I went up and down the A4 the other night to give it a run. Send me a PM if you fancy a run in it.
I always seem to pay a bit too much, but at least with this one I picked a good example. I'm sure my OH paid too much for her last car that I was involved with buying too...The only car I've bought cheap was my RS2000 and I bought it off my parents.
I always seem to pay a bit too much, but at least with this one I picked a good example. I'm sure my OH paid too much for her last car that I was involved with buying too...The only car I've bought cheap was my RS2000 and I bought it off my parents.
Gassing Station | BMW General | Top of Page | What's New | My Stuff


