drop links

[cerdad]

Somebody makes uprated drop links but i cannot find them, any ideas?

[Gazzab]

I think standard are fine.

[G9RGE]

Got mine off Steve heath

[anonymous-user]

G9RGE said:

Got mine off Steve heath

Haven't a few of these been found to snap?

[Tanguero]

djstevec said:

Haven't a few of these been found to snap?

One of my Steve Heath back ones snapped. I replaced them with links I fabricated myself which use the standard bush arrangement at the suspension arm end and a rose joint (in a boot) at the anti roll bar end.

I also needed to replace the rose joints on the SH front ones after about 4 years and put boots on those as well.

[ridds]

Yep, don't bother. Unless you buy a decent set of rose joints to go in them and some correct diameter bolts.

[Choo]

I believe that Leven were developing some drop links for the Cerb, I would give them a call and check as the prototypes looked great.

[FarmyardPants]

both mine snapped, they were v spindly at the chassis end compared with the oem ones.

[Mad Mark]

One of mine snapped a while back so running with the roll bar disconnected while keeping my eyes open for some replacements.
So all options people have input is welcome.

[scotty_d]

Gazzab said:

I think standard are fine.

^this

Pop some new push's in or even go polly and they are fine. I used rose jointed ones from SH in my Chim and they made no odd's TBH.