Tamora door speaker wiring

[Ant.]

Just about to fit some door speakers to the Tamora and thought I would ensure the wiring is in place first.

There is speaker wiring in the doors, and I have removed the stereo housing.
There are only speaker connections between the ISO plug and the larger 24 way connector for the rear speakers.

No problem I thought there are 4 spare ways in the stereo side of the 24 way and the corresponding ways are populated in the other end, so it must be those 4 ways for the door speakers.
Have shorted the wiring in the drivers door to identify the pair in the 24 way , but nothing shows !!!


Any one had to complete the wiring behind the stereo to get the door speakers to work?

[shep1001]

I had the wires in the doors too, not connected to anything behind the head unit so ended up running new cables in to the ISO loom on the stereo

Shep

[Ant.]

Were the wires in the a post plug though?

[Ant.]

Right, sussed it out, took the drivers door off and found that the speaker wiring goes as far as the plug on the door. There is nothing in the A post socket. So now I know where just need to get some female pins and push them in the correct holes.

[Ant.]

All done, new 5" speakers in the doors, had to have both doors off to make connection into A post plug.