Is A 12v Adaptor The Same As A 12V Trickle Charger ?
Discussion
I'm building a site radio using spare car parts (tougher and louder than what's generally available).
I'll use a 12v leisure battery so it's lighter and won't leak which just leaves the way to charge it.
I have car chargers but obviously they are bulky.
Can I just use a 2 or 3 amp 12v adaptor or is a simple battery charger more than this ?
Cheers
I'll use a 12v leisure battery so it's lighter and won't leak which just leaves the way to charge it.
I have car chargers but obviously they are bulky.
Can I just use a 2 or 3 amp 12v adaptor or is a simple battery charger more than this ?
Cheers
You'll need more than 12V to charge the battery.
If you use a power supply to charge the battery, bad things will happen as they don't like being overcharged.
Good trickle chargers are sophisticated beasts that change their mode depending on the battery charge, rather than a simple DC PSU.
If you use a power supply to charge the battery, bad things will happen as they don't like being overcharged.
Good trickle chargers are sophisticated beasts that change their mode depending on the battery charge, rather than a simple DC PSU.
I thought it might be but this:
http://www.ebay.co.uk/itm/AC-DC-12V-2A-ADAPTOR-UK-...
Looks remarkably like this:
http://www.ebay.co.uk/itm/SILVERLINE-12V-BATTERY-T...
Except the first one has 4x the amps
http://www.ebay.co.uk/itm/AC-DC-12V-2A-ADAPTOR-UK-...
Looks remarkably like this:
http://www.ebay.co.uk/itm/SILVERLINE-12V-BATTERY-T...
Except the first one has 4x the amps
They are going to look similar from the outside, and internally they'll have a lot in common:
They'll both constitute a switch mode power supply with some control electronics, however the trickle charger will have some feedback control that'll switch it off if the output impedance crosses some sort of threshold.
PSUs and chargers are 95% similar... just they are different enough to be useless when interchanged.
They'll both constitute a switch mode power supply with some control electronics, however the trickle charger will have some feedback control that'll switch it off if the output impedance crosses some sort of threshold.
PSUs and chargers are 95% similar... just they are different enough to be useless when interchanged.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


