E30 exhaust - 3 piece Vs 2 piece HELP
E30 exhaust - 3 piece Vs 2 piece HELP
Author
Discussion

mccrackenj

Original Poster:

2,048 posts

257 months

Wednesday 4th July 2012
quotequote all
Hi all

I'm hoping someone can advise me re the right exhaust for my 1988 325ise.

I have a blowing from the back box of my E30 because a previous owner has fitted a stainless 'sports' box in a cack-handed manner, so I wanted to replace the back box.

I therefore bought what I thought was the correct rear pipe/silencer for a 1988 325i - similar to this:

http://www.ebay.co.uk/itm/IMASAF-exhaust-rear-sile...

This is the rear of a 2 part system. The 1st part is a front pipe from the manifold and a middle silencer assembly - like this: http://www.ebay.co.uk/itm/BMW-325-E30-FRONT-EXHAUS...

The 2nd part is this long pair of pipes and a the rear box as above.

BUT - having investigated more thoroughly I find that the car has a 3 part system - the 1st part is a twin front pipe, 2nd part is a central silencer and 2 long pipes to the 3rd part, which is just a back box & tail pipes.

If I put my car's details into ECP's site they come up with a 3 part system (but unhelpfully, no pictures) whereas if I enter the same details into GSF's site I get the rear of a 2 part system that appears identical to what I've bought - but they dodn't seem to stock the front part, which is handy.

So:

Having bought the rear section of a 2 part exhaust - can I just buy the correct front/middle part and fit this 2 part system in place of the 3 part system that is currently on the car?

OR - do I have to bin the rear section I've already bought and buy all 3 parts of a 3 part system?

Sorry if this is complicated, I hope you follow what I mean. All advice gratefully received.

Cheers

John

Edited by mccrackenj on Thursday 5th July 08:45

mccrackenj

Original Poster:

2,048 posts

257 months

Thursday 5th July 2012
quotequote all
anyone?

E30M3SE

8,493 posts

227 months

Thursday 5th July 2012
quotequote all
Happy to be corrected, but you may run into issue with the exhaust manifold flanges being different on 2 piece to 3 piece versions, just get the correct rear section for your car.

mccrackenj

Original Poster:

2,048 posts

257 months

Thursday 5th July 2012
quotequote all
Hi

Thanks for replying. I was afraid there'd be some catch.

It'll have to be all 3 pieces then as whoever fitted the rear box has welded it (very badly) to the end of the middle section, so I'll need a middle section too - and if I'm replacing both middle and rear there seems no point in not going the whole hog a doing front pipes too. No point saving £40 odd when I'm going to be spending over £300 now.

Just when I'd decided to sell it too.

Cheers