anywhere in North (NE) England to put my S back together

[magpies]

Some time ago I purchased a write off S rolling chassis - had front end hit and the owner then sold the engine and box along with the front brakes. I have refurbed the chassis with new outriggers and replacement front offside section. Fitted new front discs and AP 4pots, fitted rear discs and calipers, fitted an LSD. Also fitted a 24v Cosworth along with MT75 box.

Unfortuntely I had a fall earlier this year and hurt my hip and back and so find it difficult to work on the car. I would like to have the car back on the road next year and am looking for someone to near enough finish it off. Wire it up plumb it up refit the body tub - basically so it starts and rolls under its own power.

Any-one know of a company / person who would be interested??

Car located in Teesside




I'll post more photos

[jwoffshore]

Hi Mick, sorry to read of your problems. You've done well with what was a bit of a wreck of a chassis. I'm too far away to be able to assist you directly. The nearest company I can think of is RT Racing in Sheffield. http://www.rtracing.co.uk/ They have done a good job with another member's V8S, which you will find if you look in the S series area.

[threespins]

Try Selby TVR.

[beancounter]

Speak to Steve Darvill at SD Autotec in Great Ouseburn near Boroughbridge. He has done a fantastic chassis restoration on my Chimaera plus new cam and clutch whilst body off. All work done brilliantly and high standards of finish - really is better than it was new. www.sdautotec.co.uk

[peteA]

Hexham horseless carriages...? Won't be cheap due to labour and vat but it would be top notch....you could always ask anyway? Speak to tony

[bobbins]

Another vote for Steve at SD Autotec, goes the extra mile and knows his stuff.