Alpina C2 2.7 three series
Alpina C2 2.7 three series
Author
Discussion

CoolHands

Original Poster:

23,715 posts

226 months

Tuesday 10th July 2012
quotequote all
So I took these pics of a beemer I saw pulling out a garage in front of me. I was taking them for the 'misbadging cars' thread biggrin

However just googled and it turns out there was a C2 beemer. I know nothing about them, so do you think this was real? To my uninformed eye, it looked real thinking back - it did have some kind of sporty front lower spolier on etc. Anyway, thought you might be interested.




E30M3SE

8,493 posts

227 months

Tuesday 10th July 2012
quotequote all
Impossible to tell from those shots, but quite possibly real.

Cheib

25,484 posts

206 months

Tuesday 10th July 2012
quotequote all
I'd say the Sytner supplying dealer sticker means a good chance it's real.

TheEnd

15,370 posts

219 months

Tuesday 10th July 2012
quotequote all
The 3D model badges are pretty rare and expensive, but there were loads of 2.7 strokers made years ago that claimed to be Alpinas.

Cheib

25,484 posts

206 months

Tuesday 10th July 2012
quotequote all
Very rare car if it is one though. Someone could probably do a check on the reg no. ? But I know not how.

E31Shrew

5,967 posts

223 months

Tuesday 10th July 2012
quotequote all
I would've thought a G plate [89] was a tad too late for a C2 but I'm no expert. Seem to recall most were pre facelift eg C and D plate

http://en.wikipedia.org/wiki/Alpina

ETA Not sure if this is accurate but would seem that the C2 finished in 87



Edited by E31Shrew on Tuesday 10th July 15:23

E30M3SE

8,493 posts

227 months

Tuesday 10th July 2012
quotequote all
Comes back as a 2494cc..............

TheEnd

15,370 posts

219 months

Tuesday 10th July 2012
quotequote all
Unlikely then, it's possible some would show up as 325i as that is the model name, in the same way you can't make a Ford Fiesta by putting a Fiesta engine into a mondeo, but Alpina would have had it re-registered as a 2.7 even if it was a UK Sytner conversion and not a German factory built car.


It's still possible it has a 2.7 engine in it, but doubtful it would be "genuine" under usual terms.

waxaholic

374 posts

230 months

Tuesday 10th July 2012
quotequote all
To late to be a c2, didnt the B3 come after 1987 ?

Mustard

6,992 posts

276 months

Tuesday 10th July 2012
quotequote all
Well most C2 2.7's were reg'd 88/89 judging by this list... Some as late as 91
http://www.theALPINAregister.com/C2

And if you punch in some reg numbers some show as 2.5 (despite being 2.7) and some as 2.7 on Dvla

Ie G629NRR




Edited by Mustard on Tuesday 10th July 19:25

waxaholic

374 posts

230 months

Tuesday 10th July 2012
quotequote all
[quote=Mustard]Well most C2 2.7's were reg'd 88/89 judging by this list... Some as late as 91
http://www.theALPINAregister.com/C2

And if you punch in some reg numbers some show as 2.5 (despite being 2.7) and some as 2.7 on Dvla

Ie G629NRR

Good find, completely forgot about the earlier c2 2.5






Leins

10,509 posts

179 months

Tuesday 10th July 2012
quotequote all
V5s are all over the place on Sytner conversions folks. Mine was registered as a 325i, but converted 6 days later in 1991 by Sytners (have a copy of the original build sheet from them to prove it wink). It's a C2.5, not a 2.7, so same 2494cc capacity but Alpina ECU and camshaft = 190bhp:


E24man

8,183 posts

210 months

Wednesday 11th July 2012
quotequote all

E30M3SE

8,493 posts

227 months

Wednesday 11th July 2012
quotequote all
Guessed the 2494cc with DVLA may have been a red herring.

Why is it still running the 'pig iron' exhaust manifold?



Did they not use a 6 branch Janspeed manifold commissioned by Sytners for rhd cars?

Leins

10,509 posts

179 months

Wednesday 11th July 2012
quotequote all
E30M3SE said:
Guessed the 2494cc with DVLA may have been a red herring.

Why is it still running the 'pig iron' exhaust manifold?



Did they not use a 6 branch Janspeed manifold commissioned by Sytners for rhd cars?
No, think it was optional, as I don't have it on mine. They all had the Alpina exhaust though, just not all the 6 branch. I know someone with an 89 2.7 that didn't have one either, but retro-fitted it. No two C2s seem to be the same spec, not sure if that's because of individual requests or just what Sytners had to hand at the time

anonymous-user

85 months

Wednesday 11th July 2012
quotequote all
Cheib said:
I'd say the Sytner supplying dealer sticker means a good chance it's real.
Those exact stickers are for sale on ebay for a few quid. Was thinking of getting one for mine wink

Oi_Oi_Savaloy

2,315 posts

291 months

Wednesday 11th July 2012
quotequote all
Leins said:
V5s are all over the place on Sytner conversions folks. Mine was registered as a 325i, but converted 6 days later in 1991 by Sytners (have a copy of the original build sheet from them to prove it wink). It's a C2.5, not a 2.7, so same 2494cc capacity but Alpina ECU and camshaft = 190bhp:

I'm loving that. (check my profile!)

Leins

10,509 posts

179 months

Wednesday 11th July 2012
quotequote all
Oi_Oi_Savaloy said:
I'm loving that. (check my profile!)
Thanks very much, yeah I love the Tourings too. Is that one in your profile the 320i or the 325i? Looks lovely

I was originally looking for an E30 M3 or an RS2, but then this came up and I've always loved everything Alpina so jumped at the chance. It's not the quickest car in the world, although has performance similar to a new 520d as I've found out wink, but as a thing to trundle around in with the sunroof open I just love it. Always puts a smile on my face when I go into the garage and end up having little chats with it smile. Sorry, probably coming across as a bit mental here, but there's very few more modern cars I've had that I've done that with!

E30M3SE

8,493 posts

227 months

Wednesday 11th July 2012
quotequote all
Leins said:
No, think it was optional, as I don't have it on mine. They all had the Alpina exhaust though, just not all the 6 branch. I know someone with an 89 2.7 that didn't have one either, but retro-fitted it. No two C2s seem to be the same spec, not sure if that's because of individual requests or just what Sytners had to hand at the time
OK. I thought that was standard on them as part of the 2.7 engine package.

B17NNS

18,506 posts

278 months

Wednesday 11th July 2012
quotequote all
Leins said:
cool