323 Ci misfiring
323 Ci misfiring
Author
Discussion

GWC

Original Poster:

4,432 posts

226 months

Wednesday 11th July 2012
quotequote all
I have a year 2000 323Ci it developed an intermittent erratic idle and misfire about a month ago I read the fault codes and it was misfiring on all cylinders with a malfunction on the intake camshaft position sensor (0340), I replaced the sensor and reset the fault codes and all was well. In the last few days it has started doing it again, it is misfiring on just 3 cylinders now and has the same 0340 code.

Any thoughts on what else to check?



E30M3SE

8,493 posts

227 months

Wednesday 11th July 2012
quotequote all
Swop the coil for #3 with one of the others, does the misfire move?

GWC

Original Poster:

4,432 posts

226 months

Wednesday 11th July 2012
quotequote all
It's misfiring on three of the cylinders now.

E30M3SE

8,493 posts

227 months

Wednesday 11th July 2012
quotequote all
Dohhhhh.


Sorry though it was misfiring only on cylinder #3...........banghead

Did you use a Genuine BMW sensor?


GWC

Original Poster:

4,432 posts

226 months

Wednesday 11th July 2012
quotequote all
It was a Eurocarparts OEM one.

E30M3SE

8,493 posts

227 months

Wednesday 11th July 2012
quotequote all
Ok.

There are 2 cam sensors on these cars, inlet and exhaust,



Part #5 and part #18.

GWC

Original Poster:

4,432 posts

226 months

Wednesday 11th July 2012
quotequote all
It was part 18 that I replaced, would a faulty sensor on the exhaust side produce the same fault code?

E30M3SE

8,493 posts

227 months

Wednesday 11th July 2012
quotequote all
Believe that code relates to circuit 'a' which is inlet, which is pointing towards the sensor you have already replaced.

Check the connection and wiring to/from the sensor. It may a duff sensor.

GWC

Original Poster:

4,432 posts

226 months

Thursday 12th July 2012
quotequote all
I'll have a check now, going to check the intake boots for cracks and splits too.

GWC

Original Poster:

4,432 posts

226 months

Thursday 12th July 2012
quotequote all
Well, I took the sensor off and refitted it and the car is running fine again at the moment so maybe the connection had come loose after a month? Thanks for your help.