Discussion
I ran a 328i (wasn't a sport tho) for 4 years and it was a fantastic car.
It went well, sounded great - managed to be both a comfy cruiser and also held its own on the Nurburgring. It was my first RWD car so I paid for a day with Don Palmer at Bruntingthorpe to learn how to 'drive' a RWD properly.
I had no real problems with it, despite it being a relatively high-miler (bought at 110k, sold at 140k).
Autocar at the time said it was "90% of an M3 for 50% of the cost" and I would tend to agree.
It went well, sounded great - managed to be both a comfy cruiser and also held its own on the Nurburgring. It was my first RWD car so I paid for a day with Don Palmer at Bruntingthorpe to learn how to 'drive' a RWD properly.
I had no real problems with it, despite it being a relatively high-miler (bought at 110k, sold at 140k).
Autocar at the time said it was "90% of an M3 for 50% of the cost" and I would tend to agree.
rossi-328i-sport said:
a couple of mine 



Absolutely stunning.



I bought mine with no knowledge of the Nikasil issue (only learned about it after I'd bought it
) but had no problems whatsoever. Is it still an issue these days? I thought that if they were going to go, they would have gone by now?I did exactly the same, a week after i bought it i became a member of several forums and found out about the issue.
My stomach turned but to this day (touch wood) i have never had an issue, no burning oil, no rough idle. all of witch are symptoms.
Im over 100k now and still pulls superbly and loves a stretch around a track now and again
With the few mods i have mad these easily stand there ground amongst todays cars and surprise a lot of people.
If you look after these they definitely look after you
My stomach turned but to this day (touch wood) i have never had an issue, no burning oil, no rough idle. all of witch are symptoms.
Im over 100k now and still pulls superbly and loves a stretch around a track now and again

With the few mods i have mad these easily stand there ground amongst todays cars and surprise a lot of people.
If you look after these they definitely look after you

monthefish said:
I bought mine with no knowledge of the Nikasil issue (only learned about it after I'd bought it
) but had no problems whatsoever. Is it still an issue these days? I thought that if they were going to go, they would have gone by now?
Loads of people will tell you it's no longer an issue and that if the engine was going to be affected then it would have happened by now but that's not exactly true.
) but had no problems whatsoever. Is it still an issue these days? I thought that if they were going to go, they would have gone by now?As you probably know, Nikasil engines suffered premature bore wear due to high sulphur petrol eating away the Nikasil cylinder bore linings.
At the time, BMW only replaced engines that showed signs of premature excessive bore wear. If there was no bore wear evident then they did not replace the engines as a matter of course.
Also, at first BMW didn't understand what the problem was and so replaced Nikasil engines with new Nikasil engines, it was only later on that they discovered the issue was due to the sulphur eating the bore lining away and so used the Alusil engines for replacements.
Of the cars that had already had their Nikasil engines replaced with another Nikasil engine, BMW would only replace the second Nikasil engine if it too showed signs of premature bore wear. If the second Nikasil engine showed no symptoms of imminent failure then it did not get replaced.
Now here's the part that people get wrong when they say Nikasil issues no longer occur:
If the Nikasil engine had been run on high sulhur petrol for any length of time "back in the day", then the cylinder bores could easily have started the process of having their linings eaten away. Back then however, this may not have given out any symptoms of the bore wear issue (Nikasil failure wasn't a sudden, instant problem that affected the cars, it was a gradual decline in the engines performance and a gradual increase in the cars oil consumption).
So rather than having the catastrophic bore wear that required the engine replacing, it could easily have had less severe premature bore wear that left owners simply thinking that the engine just used a bit more oil than some other cars.
Now with age and mileage, this bore wear will not have cured itself and got better, the wear is there for the engines life and will only get worse as time goes by as all engines suffer bore wear to one degree or another, it's just a fact of life.
When this premature wear is added to the natural, expected wear of the engine, what you can end up with is an engine who's original lifespan would have been @ 250,000 miles, but has now been reduced to @ 150,000 miles.
In this scenario, the engine failure would still be basically due to the Nikasil lining being worn away long before it should have been, and the failure symptoms will be identical to those encountered by owners "back in the day", who required engine replacements (high oil consumption, engine smoking, loss of power, poor starting, big engine/whole car vibrations etc., etc.)
Something that doesn't hep the situation, especially in the case of the 328i Sport, is the fact that these are not the type of car that have been used just for gentle, steady driving over the years. Most of them will have been driven hard at sometime in their lives and hard driving accelerates wear on the engines.
At the end of the day, believe what you want to believe, but engine wear does not cure itself because someone changed the fuel they put in the car, "back in the day". Once the wear is there, it's there for life and doesn't get any better.
Oh!, and BTW, When I bought My 328i Sport 6 years ago, I had BMW check the engine compressions and they reported that the engine was healthy with good, balanced compressions on all 6 cylinders.
Even so, it used a bit of oil back then and today it uses 1 litre of oil every 250 ~ 300 miles on an engine that has 147,000miles under its belt. Have a guess what as to what their diagnosis is!

lexusboy said:
Well I recently got my tax rebate and I've decided I want to finally venture into the world of RWD.
Was browsing AutoTrader and came across a decent looking 328 manual Sport so was just wondering what peoples opinions of they are, performance, handling etc
Thanks
I keep seeing people posting requesting opinions on the E36 328i Sport....decided to comment, as I really miss mine! Was browsing AutoTrader and came across a decent looking 328 manual Sport so was just wondering what peoples opinions of they are, performance, handling etc
Thanks
I sold it to my brother 5 years ago as I wanted a change, having owned it for 6 years and it had only 39k miles on the clock. I must admit, I really want to buy it back now. My brother has let it go a bit so it needs some cash spent on the rear arches (check those, they are common area for rust), and it probably needs some new shocks (I think the rears sag, or springs can need replacement). I can honestly say it was the most bullet proof car. The automatic gearbox is fantastic, the engine used to just want to go and go and go, it would fly through the gears and keep on going, drop a cog for kick down, and it pulled in any gear.
I think mine had the Avus package, originally a demo car from BMW Stevenage - so it had the Avus Blue Paintwork, and Silver Grey leather interior on a 1996-P reg. If you are looking for one - spec wise - full auto aircon, full obc, centre armrest, and avus pack if you can find one (think it basically had harder suspension and a limited slip diff? - somebody might be able to confirm, I forget now). It can be a bit tale happy on a wet roundabout (no traction control on the '96, think it was standard from '98), but it's so predictable to catch it was never an issue.
The main issue I had with mine was the dealer fit alarm system, they fall apart with age, and I kept getting a battery drain from the central locking system (removed the fuse, still works on the alarm, rather odd) but you might be worth updating that on purchase - I think my old car needs a new alarm now (another thing my brother has let go). Otherwise, great car for the money.
I guess a 50k miles one would be £2,500-3,000? Not sure where they sit price wise now? (I'm sure someone can give a better guide on price - seems that finding one is the issue, so I doubt they will go lower).
Oh dear, I think I've talked myself into buying it back!
Here she was when I had it:

Yeah, the M-Sport body kit was standard, just the spoiler was a delete option (from what I remember). It might be my photo, but I think the sills on the side of mine are the same as Rossi's car.
In '98 they changed the kidney grills (more rounded and larger looking), and put staggered tyre sizes on (larger rear compared to front). Mine was a '96 pre-grill-refresh and has same tyre size all round.
Edit to add: The 'refresh' also changed the side indicator lamps, and a few bits like the steering wheel and side door airbags, with addition of standard traction control (I think)
In '98 they changed the kidney grills (more rounded and larger looking), and put staggered tyre sizes on (larger rear compared to front). Mine was a '96 pre-grill-refresh and has same tyre size all round.
Edit to add: The 'refresh' also changed the side indicator lamps, and a few bits like the steering wheel and side door airbags, with addition of standard traction control (I think)
Edited by Moycie on Friday 13th July 13:44
rossi-328i-sport said:
The Avus Suspension was standard on all 328i sports. Closest you will get to it now are the bilstein B6`s unless someone would like to correct me on that.
Avus blue was a rare colour, mainly found on the 3.0 M3, part of the reason i searched high and low to find mine with the silver leather too

In regards to the twisted side skirts, all 328i Sports had them as standard as then have the full M-Tech Kit.
Ah right, wasn't sure, just remember I had the spec sheet and it listed "AVUS..suspension...something or another" - memory a bit vague. Surprised I remember that at all.Avus blue was a rare colour, mainly found on the 3.0 M3, part of the reason i searched high and low to find mine with the silver leather too


In regards to the twisted side skirts, all 328i Sports had them as standard as then have the full M-Tech Kit.
I love the Avus Blue - totally sold the car to me when I first saw it. If I remember, the paint was a £2,500 option alone in '96.
Yours looks stunning - mine was as shiny and clean as that when I had it (brother not "into" his cars...pains me to see it now). In the sunshine it looks great. Your pictures really do show how vibrant the paint is
I can see a snatch back from my brother on the cards...

Yes i really do love the Avus blue.
Sort of sealed the deal for me at the time
its due another rotary polish but i always try to keep on top of it with a good few coats of my preferred wax .
Im almost sure the neighbors have labeled me a nut case, always out there whatever the weather lol
Sort of sealed the deal for me at the time

its due another rotary polish but i always try to keep on top of it with a good few coats of my preferred wax .

Im almost sure the neighbors have labeled me a nut case, always out there whatever the weather lol

rossi-328i-sport said:
Im almost sure the neighbors have labeled me a nut case, always out there whatever the weather lol 


O/T
Btw, your wheels - I assume you had a professional refurb and polish? I know mine are white and nicely oxidised in places now - so if i buy it back, I will need to get them done. I have similar wheels on my Griffith and had a refurb recently. Having trouble keeping them in a shine and mirror state - anything you use in particular?
I split them myself.
Really easy to do as they are only 2 piece.
10mm hex socket on the bolts inside the wheel, give the center a knock and it falls out.
i used nitromorse to remove the existing lacquer on the diamond cut lips them i wet sanded until onto 3000 grit.
Then polished until almost mirror finish with...wait for it... the best Metal polish i have ever used..."ALU" Belgom Alu polish.
It is superb and i have tried a lot of metal polishes.
Then sealed with poor boys wheel seal.
All very time consuming but so worth it .
Really easy to do as they are only 2 piece.
10mm hex socket on the bolts inside the wheel, give the center a knock and it falls out.
i used nitromorse to remove the existing lacquer on the diamond cut lips them i wet sanded until onto 3000 grit.
Then polished until almost mirror finish with...wait for it... the best Metal polish i have ever used..."ALU" Belgom Alu polish.
It is superb and i have tried a lot of metal polishes.
Then sealed with poor boys wheel seal.
All very time consuming but so worth it .
rossi-328i-sport said:
I split them myself.
Really easy to do as they are only 2 piece.
10mm hex socket on the bolts inside the wheel, give the center a knock and it falls out.
i used nitromorse to remove the existing lacquer on the diamond cut lips them i wet sanded until onto 3000 grit.
Then polished until almost mirror finish with...wait for it... the best Metal polish i have ever used..."ALU" Belgom Alu polish.
It is superb and i have tried a lot of metal polishes.
Then sealed with poor boys wheel seal.
All very time consuming but so worth it .
Fantastic effort. They look great. Thanks for the info. Just cleaning them is a pain, but agreed, it is so worth it. Great looking alloys for the E36.Really easy to do as they are only 2 piece.
10mm hex socket on the bolts inside the wheel, give the center a knock and it falls out.
i used nitromorse to remove the existing lacquer on the diamond cut lips them i wet sanded until onto 3000 grit.
Then polished until almost mirror finish with...wait for it... the best Metal polish i have ever used..."ALU" Belgom Alu polish.
It is superb and i have tried a lot of metal polishes.
Then sealed with poor boys wheel seal.
All very time consuming but so worth it .
So, we digress....to the original poster - it's been a reminiscing session so far...in summary, get it bought!

Gassing Station | BMW General | Top of Page | What's New | My Stuff


