For you MS'ers
Discussion
Noticed Phil Ringwood had posted these tutorials up elsewhere so thought I would share it with you Megasquirters 
helps explain the settings and what they do if your not into hours of reading 
he covers a lot of what I had already read up on but I don't mind a read so ......... 
http://www.youtube.com/user/ExtraEFI?feature=watch watch tutorials 1-9
helps explain the settings and what they do if your not into hours of reading he covers a lot of what I had already read up on but I don't mind a read so ......... http://www.youtube.com/user/ExtraEFI?feature=watch watch tutorials 1-9 
Alexdaredevilz said:
I lasted 3 mins then woke up with qwerty on my forehead
But loads of info worth watching
Well if you want to MS you better get on the bus and get interested otherwise you are in for disappointment But loads of info worth watching
Edited by Alexdaredevilz on Tuesday 17th July 14:37
you really only get the best from this kind of kit if you read/listen IMO getting a drive-in-drive-out ECU is not my idea of fun & not knowing f
k all about it 
No offence like 
SILICONEKID340HP said:
gifdy said:
SILICONEKID340HP said:
Hi was hoping Philip will do a two day course the a good night out in Norwich..
Mines only the MS2 !
Yes please ! Two days might be pushing my attention span but a day + curry evening....I'm in ! Mines only the MS2 !
SILICONEKID340HP said:
Hi was hoping Philip will do a two day course the a good night out in Norwich.. Mines only the MS2 !
He caters for MS2 & MS3 in those vids Daz Mines only the MS2 ! that's the whole point, how do i know cos i was quiet at the shop and watched some of them even though it goes over a lot of stuff i have read previously its still useful to owners making the switch IMO 
Simon says said:
SILICONEKID340HP said:
Hi was hoping Philip will do a two day course the a good night out in Norwich.. Mines only the MS2 !
He caters for MS2 & MS3 in those vids Daz Mines only the MS2 ! that's the whole point, how do i know cos i was quiet at the shop and watched some of them even though it goes over a lot of stuff i have read previously its still useful to owners making the switch IMO v8 racing said:
SILICONEKID340HP said:
Wahts the difference between MS2 and MS3 ..Am i loosing out ?
1 digit Daz unless you want enough options to make your head explode 
seriously though MS2 is all the RV8 needs IMO if you want to go full sequential then this would be one of the biggest reasons to go for the MS3 for a bit more economy low down RPM behavior/manners etc it can do a hell of a lot of other stuff and as lots of outputs to control just about anything you want to if you watch those vids Phil Ringwood shows you with the drop down boxes/menus 
it will even wash the car & walk the dogs 
Oh yeh! & the box is bigger Edited by Simon says on Tuesday 17th July 20:12
Simon says said:
v8 racing said:
SILICONEKID340HP said:
Wahts the difference between MS2 and MS3 ..Am i loosing out ?
1 digit Daz unless you want enough options to make your head explode seriously though MS2 is all the RV8 needs IMO if you want to go full sequential then this would be one of the biggest reasons to go for the MS3 for a bit more economy low down RPM behavior/manners etc it can do a hell of a lot of other stuff and as lots of outputs to control just about anything you want to if you watch those vids Phil Ringwood shows you with the drop down boxes/menus it will even wash the car & walk the dogs Oh yeh! & the box is bigger I have two lambdas ,one on each bank,EFI EXTRAS put another lambda input in to the ECU ...still not sure how it works and if there are any benefits..
Edited by Simon says on Tuesday 17th July 20:12
Sorry they are boring, if anyone has managed to listen to the latest 9 videos without falling asleep then you need more help than an MS can give 
I will be making some more in the next few days, so if anyone is suffering from insomnia Im here to help.
I have thought long and hard about doing a day for you MS users, but its hard to know what to cover as people would all be at different levels. I would also like Shaun to be involved, as he is very experienced with the RV8 and MS, so it would need to cover his expenses to get down to Norwich. I would also like a good turn out, so agreeing a time /place could be hard work. Finding a suitable space or venu is also not easy.
thanks
Phil
I will be making some more in the next few days, so if anyone is suffering from insomnia Im here to help.
I have thought long and hard about doing a day for you MS users, but its hard to know what to cover as people would all be at different levels. I would also like Shaun to be involved, as he is very experienced with the RV8 and MS, so it would need to cover his expenses to get down to Norwich. I would also like a good turn out, so agreeing a time /place could be hard work. Finding a suitable space or venu is also not easy.
thanks
Phil
daxtojeiro said:
Sorry they are boring, if anyone has managed to listen to the latest 9 videos without falling asleep then you need more help than an MS can give
I will be making some more in the next few days, so if anyone is suffering from insomnia Im here to help.
I have thought long and hard about doing a day for you MS users, but its hard to know what to cover as people would all be at different levels. I would also like Shaun to be involved, as he is very experienced with the RV8 and MS, so it would need to cover his expenses to get down to Norwich. I would also like a good turn out, so agreeing a time /place could be hard work. Finding a suitable space or venu is also not easy.
thanks
Phil
What about booking a rolling road and bring Shaun along for the whole day..And have so many cars !I will be making some more in the next few days, so if anyone is suffering from insomnia Im here to help.
I have thought long and hard about doing a day for you MS users, but its hard to know what to cover as people would all be at different levels. I would also like Shaun to be involved, as he is very experienced with the RV8 and MS, so it would need to cover his expenses to get down to Norwich. I would also like a good turn out, so agreeing a time /place could be hard work. Finding a suitable space or venu is also not easy.
thanks
Phil
daxtojeiro said:
ChimpofDarkness said:
I've watched all Phils videos now and nowhere does he tell you where the mixture screw is on MegaSquirt.
My Canems thing better come with a mixture screw or I'm buggered.
Am I missing something
Give me a chance, Ive got to work up to that adjustment,My Canems thing better come with a mixture screw or I'm buggered.
Am I missing something
Phil
Gassing Station | Chimaera | Top of Page | What's New | My Stuff