I want more noise...
I want more noise...
Author
Discussion

The Nur

Original Poster:

9,168 posts

216 months

Tuesday 17th July 2012
quotequote all
Having now covered about 2 thousand miles in my 328, I am desiring more noise from the straight 6.

I have intentions of carrying out a 325 manifold and intake swap but not for a little while yet as I have other priorities for the car for the time being.

Does anybody have any suggestions on how I might liberate some more noise from it?

TheEnd

15,370 posts

219 months

Tuesday 17th July 2012
quotequote all
Some sort of induction kit?
It won't give much difference in power but it'll give you more induction roar.

The Nur

Original Poster:

9,168 posts

216 months

Tuesday 17th July 2012
quotequote all
This was my thought but I am unsure on how worth it it would actually be..

Having done the induction kit thing in the past on my first car (Citroen C2 1.4, just as pointless as it sounds) I realise I wouldn't be unleashing rampant German horses hehe But it did create a lot more induction noise...

Have any PH'ers performed such a modification? Was it a complete waste of time?

Daniel1

2,931 posts

229 months

Tuesday 17th July 2012
quotequote all
There is a snorkel in the air box you can remove easily. It won't be as loud as an induction kit but will give you the idea if you like it or not.

The Nur

Original Poster:

9,168 posts

216 months

Tuesday 17th July 2012
quotequote all
Is this the bit that clips in at the front of the airbox? I have had a little look at it before but couldn't see any way of detaching it. Will have another look this afternoon.

Wouldn't happen to have any idea of how to remove the thing would you?

Daniel1

2,931 posts

229 months

Tuesday 17th July 2012
quotequote all
Yeah sure. Unclip the MAF hose bit, undo the air box (2x10mm bots attaching it to the wing), lift out air box an there is a clip on the side. It's stubborn but it will slide out when you unclip it.

The Nur

Original Poster:

9,168 posts

216 months

Tuesday 17th July 2012
quotequote all
Thanks very much! I went completely the wrong way about it before hehe

rossi-328i-sport

795 posts

233 months

Tuesday 17th July 2012
quotequote all
My recommendation would be the following.

A simota (Gruppe M Replica) carbon induction unit and a super sprint exhaust, both sound superb.
No noise from the simota until you fully open her up so cruising is a dream,nice and silent.
As for the exhaust it has a lovely tone, not drony at all and still gives that "wooosh" sound you get from the standard exhaust , both coupled together sound totally superb and they look pretty good to smile

Here a couple of pics smile



ayw1

31 posts

173 months

Tuesday 17th July 2012
quotequote all
i had a dave f kit on my 328sport and loved it the noise of it after 3000rpm is wow and moreish but
i did find that as the noise was addictive so was my constant battering it to the point i thought iam going to get some points for this and not the points win prizes,ive seen them come up on ebay every
so often and under £100 which is not bad.

rumple

15,433 posts

182 months

Tuesday 17th July 2012
quotequote all
I fitted a 3,2 evo system to my 328, no performance gains but i found the cost of aftermarket systems too expnsive, you can pick them up on ebay, get the 3.2 not the 3.0 though, in the 3.0 system the lambda sensors are in the cats' not the manifold, the backsection is the same, people will back on about weight, they aint much different when on the floor, i never bothered fitting the proper mounts either, i was going to do this when they broke, they didnt, you can sell your 328 system to get some money back as well.

gaz1234

5,233 posts

250 months

Wednesday 18th July 2012
quotequote all
i have a gruppe m for sale that was on my old 330, same as the 328 i belive

The Nur

Original Poster:

9,168 posts

216 months

Wednesday 18th July 2012
quotequote all
Cheers for the recommendations chaps, shall look in to some of these.

Unfortunately today I received a mixed blessing which in a long story short sort of way, means I may have to sell the car and be without for a while (a couple of years!!). Don't worry, I haven't been banned or anything hehe Just if I want to carry on with this Uni thing I have to face the ever escalating costs frown

Anybody know of any work going in the Swansea area starting immediately? hehe

getawayturtle

3,560 posts

205 months

Wednesday 15th August 2012
quotequote all
There is a valve on the standard exhaust which blocks one of the tailpipes with a flap under 2.5k rpm. Meant to make it quiet around residential areas. Take the pipe to it off and jam it up with a golf tee, or something similar. The flap will always stay open, sounds a bit beefier low down.

Look up the "Golf Tee Mod"

This is if you are keeping the car..

The Nur

Original Poster:

9,168 posts

216 months

Wednesday 15th August 2012
quotequote all
getawayturtle said:
There is a valve on the standard exhaust which blocks one of the tailpipes with a flap under 2.5k rpm. Meant to make it quiet around residential areas. Take the pipe to it off and jam it up with a golf tee, or something similar. The flap will always stay open, sounds a bit beefier low down.

Look up the "Golf Tee Mod"

This is if you are keeping the car..
smile Oh, I am keeping it. Things went all up in the air for a bit but everything has settled down and it is staying with me

I heard about the Golf Tee mod before, went and had a look at my exhaust to check it out and it seems that the flap is jammed open anyway! Happy days hehe


Cheers though thumbup