Bamford Rose Clutch
Bamford Rose Clutch
Author
Discussion

theno23

Original Poster:

868 posts

241 months

Wednesday 18th July 2012
quotequote all
Hi all,

The clutch on my manual V8V N400 wore out after 20k miles (5k with me, 15k with the previous owner).

Having tried a flywheel change on another V8V, I decided to go down that route

I got the lighter flywheel, and dual plate clutch - wow! What a change.

It's gone from being a pain to drive in heavy traffic (I live in London) to being really easy - light, and very fast to pick up. It's now easier to crawl in traffic than a 911.

It's also much quicker to shift as you accelerate, partly because the lighter flywheel makes the engine respond much faster to the throttle, and partly because the clutch spins up much quicker, and "grips" really hard (I'm sure there's a technical term for that).

Also revmatching on downshifts is easier, you can just blip, rather than a sustained push.

Mike said that you can slip the clutch without fear of burning it out, which is fantastic if true, makes reversing a much less hair-raising experience! Still makes me nervous though.

It's taken me a bit of time to get used to the clutch, the feel is very, very different - I kept almost putting my foot through the firewall cos I am expecting it to be as heavy as the normal single-plate job! The takeup is a bit different too, the transition from 100% slip to biting is quite quick, but I got used to that after a few miles.

Overall it's a fantastic upgrade, and anyone who needs a new clutch, or who finds the normal one a pain should try it.

[I should point out that I have no connection with BR, just a happy customer, and my knowledge of clutches wouldn't fill a postcard!]

darreni

4,551 posts

301 months

Wednesday 18th July 2012
quotequote all
Whats the cost for BR clutch & flywheel.

I must admit that my location & type of driving together with the stories of regular clutch issues have put me off a vantage up till now.

theno23

Original Poster:

868 posts

241 months

Wednesday 18th July 2012
quotequote all
darreni said:
Whats the cost for BR clutch & flywheel.

I must admit that my location & type of driving together with the stories of regular clutch issues have put me off a vantage up till now.
£3500+VAT

The stock Vantage clutch is pretty heavy - it wasn't enough to put me off buying one, but definitely one of the worst aspects of the car.

It's enough money that I wasn't going to replace a perfectly good clutch, but I was giving my stock one quite a hard time... possibly subconscious desire to get a better clutch smile

yeti

10,704 posts

306 months

Wednesday 18th July 2012
quotequote all
Anyone who has heard my car can hear it revving freely every downshift - the throttle response is so much quicker. I can't imagine what it would be to like to go back to a standard DB9 clutch! Great upgrade which transforms the car, it makes no sense to put a stdard clutch in when it's time to change.

GTDB7

958 posts

199 months

Thursday 19th July 2012
quotequote all
The GT's have a twin plate as standard and I know of some GT owners who have fitted a single plate DB9 clutch to them! eek!

I wonder if BR's twin plate is compatible with the GT?


theno23

Original Poster:

868 posts

241 months

Thursday 19th July 2012
quotequote all
yeti said:
Anyone who has heard my car can hear it revving freely every downshift - the throttle response is so much quicker. I can't imagine what it would be to like to go back to a standard DB9 clutch! Great upgrade which transforms the car, it makes no sense to put a stdard clutch in when it's time to change.
Yeah, transforms is right. I can't believe how much difference it makes.

- Steve

jonby

5,367 posts

188 months

Thursday 19th July 2012
quotequote all
Did I read somewhere that the DBS manual has a twin plate clutch as standard ? In which case, does V12V have one too ?

yeti

10,704 posts

306 months

Thursday 19th July 2012
quotequote all
GTDB7 said:
The GT's have a twin plate as standard and I know of some GT owners who have fitted a single plate DB9 clutch to them! eek!

I wonder if BR's twin plate is compatible with the GT?
Eek indeed, but I don't think you do know anyone who has done that as the DB9 has a TWIN plate clutch as standard. The V8 Vantage has a single plate unit, perhaps they used that..?

yeti

10,704 posts

306 months

Thursday 19th July 2012
quotequote all
jonby said:
Did I read somewhere that the DBS manual has a twin plate clutch as standard ? In which case, does V12V have one too ?
DBS and DB9 have twin-plate clutches, the Vantage V8 has a single plate jobbie. I would imagine the V12 Vantage also has the twin plate or we'd certainly be hearing about clutches wearing out by now...

yeti

10,704 posts

306 months

Thursday 19th July 2012
quotequote all
GTDB7 said:
I wonder if BR's twin plate is compatible with the GT?
Worth an ask - I have never though to check - it will almost certainly require a flywheel change as well if so. My DB7 was a TouchTronic so never felt the shift in the manual car...

AdamV12V

5,314 posts

208 months

Thursday 19th July 2012
quotequote all
yeti said:
DBS and DB9 have twin-plate clutches, the Vantage V8 has a single plate jobbie. I would imagine the V12 Vantage also has the twin plate or we'd certainly be hearing about clutches wearing out by now...
Quite likely - the feel and use of the V12V clutch is vastly superior to the V8V clutch! I have no reverse burning smell or stalling issues now, unlike with my old V8V...

Edited by AdamV12V on Thursday 19th July 12:23

peterr96

2,226 posts

206 months

Thursday 19th July 2012
quotequote all
AdamV12V said:
Quite likely - the feel and use of the V12V clutch is vastly superior to the V8V clutch! I have no reverse burning smell or stalling issues now, unlike with my old V8V...
As maybe but I bet my V8V is faster in reverse than your V12V.
I win! smile

krisdelta

4,673 posts

232 months

Thursday 19th July 2012
quotequote all
peterr96 said:
As maybe but I bet my V8V is faster in reverse than your V12V.
I win! smile
Scary and true wink

yeti

10,704 posts

306 months

Thursday 19th July 2012
quotequote all
krisdelta said:
peterr96 said:
As maybe but I bet my V8V is faster in reverse than your V12V.
I win! smile
Scary and true wink
There is ONLY one way to decide... RACE!! biggrin

peterr96

2,226 posts

206 months

Thursday 19th July 2012
quotequote all
yeti said:
There is ONLY one way to decide... RACE!! biggrin
Right. Up to Mikeys mates airfield it is then. Think I'll need a runway to make the gearing count.
Yeti can probably beat us both though. I heard rumour BR were working on a new box with an extra reverse gear.

There's gotta be a joke in there somewhere about the gearbox in the vantage being Italian.

B-AM

4 posts

105 months

Tuesday 20th March 2018
quotequote all
Hi Mike, dear all,

is there any chance that you give us a total overview of the current performance options for the 4.7 Vantage S including the advantages and gains to standard components:

1. Full Exhaust System: 18 kilo weight reduction, 40 bhp gain
2. Lighter Flywheel & Twin Clutch: ? kilo weight reduction, improves engine acceleration and clutch performance
3. Twin Throttle Inlet Manifold: 20 bhp gain, faster on-throttle response, Better airflow for engine

Did I miss anything here?

Best,
B-AM

HBradley

1,037 posts

212 months

Tuesday 20th March 2018
quotequote all
B-AM said:
Hi Mike, dear all,

is there any chance that you give us a total overview of the current performance options for the 4.7 Vantage S including the advantages and gains to standard components:

1. Full Exhaust System: 18 kilo weight reduction, 40 bhp gain
2. Lighter Flywheel & Twin Clutch: ? kilo weight reduction, improves engine acceleration and clutch performance
3. Twin Throttle Inlet Manifold: 20 bhp gain, faster on-throttle response, Better airflow for engine

Did I miss anything here?

Best,
B-AM
Hi, you might be better to post this in the Bamford Rose Sticky near the top of the page.

B-AM

4 posts

105 months

Tuesday 20th March 2018
quotequote all
Thanks for the advice. Done.