headlight wiring

[ralph350i]

Hi Guys
Well was off to get the car Moted tomorrow and the headlights have decided to not work, pod's lift fine, side lights fine and power coming though the fuse for the dip beam, but no lights, checked power to headlamps and no power, could someone advise on the wiring for these units and is the power just sent though the wires and not though a relay first, cheers, Ralph

Edited by ralph350i on Tuesday 24th July 21:40

[pk500]

Fuse ?

[ralph350i]

pk500 said:

Fuse ?

checked mate power going across and though board also

[pk500]

is there power going through the headlamp switch

ralph350i said:

checked mate power going across and though board also

[assynt road]

Mine stopped working because of corrosion in the white connector plug that attach the headlight leads to the rest of the loom, accessed from round hole under body, below headlights. These plugs cause no end of trouble with my front lights, i'm thinking of replacing them all.

[Wedg1e]

Have a look at the diagrams here Ralph, may be of help:

http://www.wedgeneering.co.uk/TVR%20390SE%20p6.htm

[ralph350i]

Wedg1e said:

Have a look at the diagrams here Ralph, may be of help:

http://www.wedgeneering.co.uk/TVR%20390SE%20p6.htm

Cheers Wedg1e
So if i read that correct the light switch powes up the headlamps and the feed is from the fuse board, for once it sounds easy, cheer
and


thanks for everyones reply

Regards

Ralph