light switching unit
Discussion
Hi, Having recently overcome the problem of the two wires burning out on multiplug on the dim/dip unit ( I re-attached the wires directly to the pins inside the box) I now have the same issue with the 'light switching' control box.
This looks a bit more complicated, as there are three wires that have over heated in the multiplug. Two I think could be attached in the same method as the dim/dip control unit, but the third attaches to a pin beneath those and I think it is beyond the ability of my sausage like fingers. Has anyone came across a neat solution. A new box won't cure the problem as the male part on the loom is burnt away. ( snigger snigger)! HEEEEEEEELP!
This looks a bit more complicated, as there are three wires that have over heated in the multiplug. Two I think could be attached in the same method as the dim/dip control unit, but the third attaches to a pin beneath those and I think it is beyond the ability of my sausage like fingers. Has anyone came across a neat solution. A new box won't cure the problem as the male part on the loom is burnt away. ( snigger snigger)! HEEEEEEEELP!
Gassing Station | Cerbera | Top of Page | What's New | My Stuff