Another SC500 on the way
Discussion
Wasn't going to post until it was all done but excitement has got the better of me
SC being dropped off this week, installation probably late August/beginning of September. Thinking about further brake upgrades, new clutch, uprating gearbox internals and maybe half shafts
(plus who knows what else).
A big thankyou to a certain person with faired in headlights
Oh, and If you read this Linley I'm comin to getcha
SC being dropped off this week, installation probably late August/beginning of September. Thinking about further brake upgrades, new clutch, uprating gearbox internals and maybe half shafts
(plus who knows what else).A big thankyou to a certain person with faired in headlights
Oh, and If you read this Linley I'm comin to getcha

Chilliman said:
Wasn't going to post until it was all done but excitement has got the better of me
SC being dropped off this week, installation probably late August/beginning of September. Thinking about further brake upgrades, new clutch, uprating gearbox internals and maybe half shafts
(plus who knows what else).
A big thankyou to a certain person with faired in headlights
Oh, and If you read this Linley I'm comin to getcha
Exciting. Good luck.
SC being dropped off this week, installation probably late August/beginning of September. Thinking about further brake upgrades, new clutch, uprating gearbox internals and maybe half shafts
(plus who knows what else).A big thankyou to a certain person with faired in headlights
Oh, and If you read this Linley I'm comin to getcha


Chilliman said:
Wasn't going to post until it was all done but excitement has got the better of me
SC being dropped off this week, installation probably late August/beginning of September. Thinking about further brake upgrades, new clutch, uprating gearbox internals and maybe half shafts
(plus who knows what else).
A big thankyou to a certain person with faired in headlights
Oh, and If you read this Linley I'm comin to getcha
Does that mean the plenum is up for grabs ?
SC being dropped off this week, installation probably late August/beginning of September. Thinking about further brake upgrades, new clutch, uprating gearbox internals and maybe half shafts
(plus who knows what else).A big thankyou to a certain person with faired in headlights
Oh, and If you read this Linley I'm comin to getcha

Thanks for the good wishes guys 
David, be very pleased to
Er, your other points noted also 
Richard, unknown at the moment, and obviously dependent on what boost we use , but conservatively expecting a bit north of 400 for torques and bhp
Neal, cheques in the post mate
seriously though a bet is a bet, just need to meet up 
Daz, probably will be, but not until the SC is fully sorted....
Cheers,
Chilli

David, be very pleased to
Er, your other points noted also 
Richard, unknown at the moment, and obviously dependent on what boost we use , but conservatively expecting a bit north of 400 for torques and bhp

Neal, cheques in the post mate
seriously though a bet is a bet, just need to meet up 
Daz, probably will be, but not until the SC is fully sorted....
Cheers,
Chilli
I forgot about the 11 second bet. Poor show Chilli I was expecting to see you down Pod with that monster. To prove us all wrong.
May I ask who you have employed to build this monster for you? Are you going pretty much for the same spec as our friend with faired in headlights (up-rated diff, drive shafts, biggest Rotrex, bigest intercooler etc).
May I ask who you have employed to build this monster for you? Are you going pretty much for the same spec as our friend with faired in headlights (up-rated diff, drive shafts, biggest Rotrex, bigest intercooler etc).
You shouldn't need new half shafts or gearbox unless you plan on being very silly with it! You will want big brakes and nitrons though set up by someone who knows what they're doing. I would also strongly recommend an emerald ECU or similar to avoid a whole host of potential problems.
If you have any questions on installing the kit or general niggles, feel free to drop me a mail! Good choice by the way, a chim with a blower is a completely different beast to the standard car - you'll absolutely love it :-)
If you have any questions on installing the kit or general niggles, feel free to drop me a mail! Good choice by the way, a chim with a blower is a completely different beast to the standard car - you'll absolutely love it :-)
+ another 1 
Good luck with the build and lets hope its up and running and finally at a strip alongside me soon.
Even with all my spare time
my latest build is painfully slow. Probably a good thing considering preivious rush jobs 
Maybe a late Summer get together at Shakey or the pod sometime guys. Chilli can pick a date he can definately make

Good luck with the build and lets hope its up and running and finally at a strip alongside me soon.
Even with all my spare time
my latest build is painfully slow. Probably a good thing considering preivious rush jobs 
Maybe a late Summer get together at Shakey or the pod sometime guys. Chilli can pick a date he can definately make

slideways said:
V8 GRF said:
Bluebottle said:
V8 GRF, how many SC sprint stories have you started and not printed?
.
3 so far......
.
Not including this one.....
not including that one!450Nick said:
You shouldn't need new half shafts or gearbox unless you plan on being very silly with it! You will want big brakes and nitrons though set up by someone who knows what they're doing. I would also strongly recommend an emerald ECU or similar to avoid a whole host of potential problems.
If you have any questions on installing the kit or general niggles, feel free to drop me a mail! Good choice by the way, a chim with a blower is a completely different beast to the standard car - you'll absolutely love it :-)
Thanks Nick If you have any questions on installing the kit or general niggles, feel free to drop me a mail! Good choice by the way, a chim with a blower is a completely different beast to the standard car - you'll absolutely love it :-)
I'm running MS2 so set up should be OK...And thanks Peter and Derek for the good wishes
Still offshore at the moment but looking forward to giving the SC a cuddle when I get back 
Gassing Station | Chimaera | Top of Page | What's New | My Stuff





