I've buckled a wheel on my Z4M! Options?
Discussion
Evening,
I hit a speed bump near to where I live about 4 weeks ago and have buckled my drivers side front
only noticed it today with a steering wheel wobble, I jacked it up and it is buckled right by the tyre valve, not massive damage but enough to spoil my enjoyment and it seems to be accentuated when braking from high speed.
Anyway can these be repaired / balanced out or will it be a new wheel?
Cheers
I hit a speed bump near to where I live about 4 weeks ago and have buckled my drivers side front
only noticed it today with a steering wheel wobble, I jacked it up and it is buckled right by the tyre valve, not massive damage but enough to spoil my enjoyment and it seems to be accentuated when braking from high speed.Anyway can these be repaired / balanced out or will it be a new wheel?
Cheers
Once a wheel is bent and then straightened it will never be as strong and will likely be a weak wheel compared to the others. Get a new one mate — not worth the risk. Straighten a panel maybe, but not he thing that keeps you on the road.
On a side note — aren't you supposed to slow down for speed bumps? f
kripple
On a side note — aren't you supposed to slow down for speed bumps? f
kripple
Pig Skill said:
Once a wheel is bent and then straightened it will never be as strong and will likely be a weak wheel compared to the others. Get a new one mate — not worth the risk. Straighten a panel maybe, but not he thing that keeps you on the road.
On a side note — aren't you supposed to slow down for speed bumps? f
kripple
Cheers, and yes you are, I just get used to gliding over them in my focus, unfortunately the Z4 doesn't so much glide as smash On a side note — aren't you supposed to slow down for speed bumps? f
kripple

Urban Sports said:
Pig Skill said:
Once a wheel is bent and then straightened it will never be as strong and will likely be a weak wheel compared to the others. Get a new one mate — not worth the risk. Straighten a panel maybe, but not he thing that keeps you on the road.
On a side note — aren't you supposed to slow down for speed bumps? f
kripple
Cheers, and yes you are, I just get used to gliding over them in my focus, unfortunately the Z4 doesn't so much glide as smash On a side note — aren't you supposed to slow down for speed bumps? f
kripple

If you are new daddy then deffo don't risk a bent wheel - have you looked for a used on off the bay?
Pig Skill said:
Urban Sports said:
Pig Skill said:
Once a wheel is bent and then straightened it will never be as strong and will likely be a weak wheel compared to the others. Get a new one mate — not worth the risk. Straighten a panel maybe, but not he thing that keeps you on the road.
On a side note — aren't you supposed to slow down for speed bumps? f
kripple
Cheers, and yes you are, I just get used to gliding over them in my focus, unfortunately the Z4 doesn't so much glide as smash On a side note — aren't you supposed to slow down for speed bumps? f
kripple

If you are new daddy then deffo don't risk a bent wheel - have you looked for a used on off the bay?
Normal tyres on the Z4M, no runflats. The annoying thing is I remember at the time thinking that I'd hit it that hard that it must have buckled a wheel, 4 weeks later after I'd forgotten about it....

Urban Sports said:
On the off chance are these a warranty claim?
Cheers
No because the damage isn't due to a manufacturing fault or a design fault, they simply weren't designed for slamming into potholes (no wheel on a standard road car is, regardless of what tyre is fitted).Cheers
The damage was down to a poorly maintained road and a lack of observation on the part of the driver (and yes, quite often you get no warning of what's ahead of you when driving in traffic, but the fact that you indicate that you "glide" over the same pothole in your Focus says immediately that you are to blame for your own misfortune - you knew the pothole was there and did nothing to avoid it!).
You could try and claim compensation from the council in charge of the road however, as they've failed to maintain the road in an acceptable condition.
To do this, you'll need to take plenty of pictures of the pothole, including measurements of width, length, and depth and of the damage to your wheel (it would also pay to get BMW to do a report on the damage to the wheel to support your case.).
Note though: There is no guarantee that the council involved will accept liability and pay out. Many of them argue that they were unaware of the pothole at the time and cannot be expected to fix them all as soon as they appear. They also tend to have a policy denying liability if the pothole is deemed too small.
4rephill said:
Urban Sports said:
On the off chance are these a warranty claim?
Cheers
No because the damage isn't due to a manufacturing fault or a design fault, they simply weren't designed for slamming into potholes (no wheel on a standard road car is, regardless of what tyre is fitted).Cheers
The damage was down to a poorly maintained road and a lack of observation on the part of the driver (and yes, quite often you get no warning of what's ahead of you when driving in traffic, but the fact that you indicate that you "glide" over the same pothole in your Focus says immediately that you are to blame for your own misfortune - you knew the pothole was there and did nothing to avoid it!).
You could try and claim compensation from the council in charge of the road however, as they've failed to maintain the road in an acceptable condition.
To do this, you'll need to take plenty of pictures of the pothole, including measurements of width, length, and depth and of the damage to your wheel (it would also pay to get BMW to do a report on the damage to the wheel to support your case.).
Note though: There is no guarantee that the council involved will accept liability and pay out. Many of them argue that they were unaware of the pothole at the time and cannot be expected to fix them all as soon as they appear. They also tend to have a policy denying liability if the pothole is deemed too small.

Cheers
www.alloyfix.co.uk
Fixed three of mine and they're all still perfect, he basically heats them up and then presses the bend out on a hydraulic jig. £50 per rim.
I have no qualms using them and don't expect my alloys are likely to explode as a result.
Of course he's probably a bit far away for what you need!
Fixed three of mine and they're all still perfect, he basically heats them up and then presses the bend out on a hydraulic jig. £50 per rim.
I have no qualms using them and don't expect my alloys are likely to explode as a result.
Of course he's probably a bit far away for what you need!
Blue Oval84 said:
www.alloyfix.co.uk
Fixed three of mine and they're all still perfect, he basically heats them up and then presses the bend out on a hydraulic jig. £50 per rim.
I have no qualms using them and don't expect my alloys are likely to explode as a result.
Of course he's probably a bit far away for what you need!
Of course they can be repaired so they are round again, but that doesn't mean they are as strong as they once were and the straightened section will always be a weak spot.Fixed three of mine and they're all still perfect, he basically heats them up and then presses the bend out on a hydraulic jig. £50 per rim.
I have no qualms using them and don't expect my alloys are likely to explode as a result.
Of course he's probably a bit far away for what you need!
Once bent out of round then on a molecular level it is impossible to recreate the uniformity and as such they are never the same. As an example take a strip of copper wire and kink it, then try and straighten it back to perfection....
OP get a new wheel — imagine having wife and child and hitting another bump or pothole and losing control.
Forget cheap fixes as they could well become an expensive mistake.
Pig Skill said:
Of course they can be repaired so they are round again, but that doesn't mean they are as strong as they once were and the straightened section will always be a weak spot.
Once bent out of round then on a molecular level it is impossible to recreate the uniformity and as such they are never the same. As an example take a strip of copper wire and kink it, then try and straighten it back to perfection....
OP get a new wheel — imagine having wife and child and hitting another bump or pothole and losing control.
Forget cheap fixes as they could well become an expensive mistake.
He won't be (legally)able to get wife and child in a Z4 at the same time though. Once bent out of round then on a molecular level it is impossible to recreate the uniformity and as such they are never the same. As an example take a strip of copper wire and kink it, then try and straighten it back to perfection....
OP get a new wheel — imagine having wife and child and hitting another bump or pothole and losing control.
Forget cheap fixes as they could well become an expensive mistake.

I agree, get a new wheel.
eastsider said:
Pig Skill said:
Of course they can be repaired so they are round again, but that doesn't mean they are as strong as they once were and the straightened section will always be a weak spot.
Once bent out of round then on a molecular level it is impossible to recreate the uniformity and as such they are never the same. As an example take a strip of copper wire and kink it, then try and straighten it back to perfection....
OP get a new wheel — imagine having wife and child and hitting another bump or pothole and losing control.
Forget cheap fixes as they could well become an expensive mistake.
He won't be (legally)able to get wife and child in a Z4 at the same time though. Once bent out of round then on a molecular level it is impossible to recreate the uniformity and as such they are never the same. As an example take a strip of copper wire and kink it, then try and straighten it back to perfection....
OP get a new wheel — imagine having wife and child and hitting another bump or pothole and losing control.
Forget cheap fixes as they could well become an expensive mistake.

I agree, get a new wheel.

Urban Sports said:
I've had a look on ebay but they tend to be refurbished so I'm not keen.
Normal tyres on the Z4M, no runflats. The annoying thing is I remember at the time thinking that I'd hit it that hard that it must have buckled a wheel, 4 weeks later after I'd forgotten about it....
Dude, just be aware that "refurbished" usually refers to the cosmetics 99% of the time so one of those should be fine.Normal tyres on the Z4M, no runflats. The annoying thing is I remember at the time thinking that I'd hit it that hard that it must have buckled a wheel, 4 weeks later after I'd forgotten about it....

christer said:
Urban Sports said:
I've had a look on ebay but they tend to be refurbished so I'm not keen.
Normal tyres on the Z4M, no runflats. The annoying thing is I remember at the time thinking that I'd hit it that hard that it must have buckled a wheel, 4 weeks later after I'd forgotten about it....
Dude, just be aware that "refurbished" usually refers to the cosmetics 99% of the time so one of those should be fine.Normal tyres on the Z4M, no runflats. The annoying thing is I remember at the time thinking that I'd hit it that hard that it must have buckled a wheel, 4 weeks later after I'd forgotten about it....

No need now anyway!

Gassing Station | BMW General | Top of Page | What's New | My Stuff


