Run flats and M3 control arms
Discussion
Hi all
I'm about to remove the run flats from my e92 335i to replace with normal tyres, but I've heard from some that the handling can be affected slightly as a result, and this can be cured by fitting front control arms from the e9x M3. Has anyone had any experience of doing this, and if so, is it worth it and roughly what are the costs?
Thanks
B14
I'm about to remove the run flats from my e92 335i to replace with normal tyres, but I've heard from some that the handling can be affected slightly as a result, and this can be cured by fitting front control arms from the e9x M3. Has anyone had any experience of doing this, and if so, is it worth it and roughly what are the costs?
Thanks
B14
As you say removing the run flats does leave you with a bit of a soft turn in and these parts sort that out.
I can't remember the exact cost but I've done this on my 130 and parts was about £400 with labour on top (maybe £300). I had mine fitted by Birds in Iver.
There are two parts in the front suspension that form the front lower wishbone, one is the control arm and the other is the tension strut. Both can be swapped for the M3 / 1M version.
I had the rear subframe bushes changed to the M3 items as well as a quaife atb so it's hard to say what did what exactly but the steering feel is much improved and feels more precise.
You can feel that it's more solidly mounted when you go over roughness on the road but it's fine. Most people wouldn't notice the difference.
It's not a realistic diy unless you have some way of setting the tracking on the front as the M3 parts are slightly longer (so you get more negative camber) and without resetting the tracking the car will be pretty much undriveable and definitely dangerous.
The only other thing to note is that if you have xenons you will need a new link for the height sensor.
I can't remember the exact cost but I've done this on my 130 and parts was about £400 with labour on top (maybe £300). I had mine fitted by Birds in Iver.
There are two parts in the front suspension that form the front lower wishbone, one is the control arm and the other is the tension strut. Both can be swapped for the M3 / 1M version.
I had the rear subframe bushes changed to the M3 items as well as a quaife atb so it's hard to say what did what exactly but the steering feel is much improved and feels more precise.
You can feel that it's more solidly mounted when you go over roughness on the road but it's fine. Most people wouldn't notice the difference.
It's not a realistic diy unless you have some way of setting the tracking on the front as the M3 parts are slightly longer (so you get more negative camber) and without resetting the tracking the car will be pretty much undriveable and definitely dangerous.
The only other thing to note is that if you have xenons you will need a new link for the height sensor.
Gassing Station | BMW General | Top of Page | What's New | My Stuff


