The old favorite...Cracked Wheels.
Discussion
What do you do when your wheel cracks at 130 and rips a hole in the sidewall?


Answer? you s
t yourself and try to slide across 2 lanes of artics 
And after losing total cofidence in the s
tw
k BMW rims, you put these on

BMW 313 Replicas for a monkey, and you know what, i bet they last longer than the s
t Cromodora/BWW ones!


Answer? you s
t yourself and try to slide across 2 lanes of artics 
And after losing total cofidence in the s
tw
k BMW rims, you put these on
BMW 313 Replicas for a monkey, and you know what, i bet they last longer than the s
t Cromodora/BWW ones!Edited by roofer on Tuesday 14th August 17:07
DennisCooper said:
Do you *REALLY* think that replica wheels are more robust than oem wheels?
Chances of you having this issue again are quite high!
Good luck!
Cheers, Dennis!
Dennis, i've had more sets of reps in the last 10 years than i can remember, going back to a set of 5 series parallels (37's?) And do you know how many issues i've had with them? None. If i was racing round the ring every week i'd go and give 3k for some super dooper magnesium jobs. For bashing up and down motorways, i'm happy to buy a set of reps once a year, and the 313's were actually lighter than the 225'S that came off.Chances of you having this issue again are quite high!
Good luck!
Cheers, Dennis!
Hi Roofer
Yes, some people do indeed report no issues with replica wheels and you do seem to have had good luck in that overall !
However, by logic that replica wheels aren't made to the same higher standards, have the higher grade materials used to make them, any R&D etc it stands that they are indeed an inferior product and prone/likely to crack, bend or fail more than a quality made product.
Of course, genuine wheels, branded higher quality wheels etc can and do bend/crack, but chances are also correspondingly less.
As per above, good luck to you !
Cheers, Dennis!
Yes, some people do indeed report no issues with replica wheels and you do seem to have had good luck in that overall !
However, by logic that replica wheels aren't made to the same higher standards, have the higher grade materials used to make them, any R&D etc it stands that they are indeed an inferior product and prone/likely to crack, bend or fail more than a quality made product.
Of course, genuine wheels, branded higher quality wheels etc can and do bend/crack, but chances are also correspondingly less.
As per above, good luck to you !
Cheers, Dennis!
DennisCooper said:
Hi Roofer
Yes, some people do indeed report no issues with replica wheels and you do seem to have had good luck in that overall !
However, by logic that replica wheels aren't made to the same higher standards, have the higher grade materials used to make them, any R&D etc it stands that they are indeed an inferior product and prone/likely to crack, bend or fail more than a quality made product.
Of course, genuine wheels, branded higher quality wheels etc can and do bend/crack, but chances are also correspondingly less.
As per above, good luck to you !
Cheers, Dennis!
Generally I would agree with you, but BMW Styling 225's cannot be described as the bold above.........Yes, some people do indeed report no issues with replica wheels and you do seem to have had good luck in that overall !
However, by logic that replica wheels aren't made to the same higher standards, have the higher grade materials used to make them, any R&D etc it stands that they are indeed an inferior product and prone/likely to crack, bend or fail more than a quality made product.
Of course, genuine wheels, branded higher quality wheels etc can and do bend/crack, but chances are also correspondingly less.
As per above, good luck to you !
Cheers, Dennis!
DennisCooper said:
Hi Roofer
However, by logic that replica wheels aren't made to the same higher standards, have the higher grade materials used to make them, any R&D etc it stands that they are indeed an inferior product and prone/likely to crack, bend or fail more than a quality made product.
Cheers, Dennis!
Like the genuine BMW ones pictured? Or the Alpina cotton reels i had on my 335 that also cracked?However, by logic that replica wheels aren't made to the same higher standards, have the higher grade materials used to make them, any R&D etc it stands that they are indeed an inferior product and prone/likely to crack, bend or fail more than a quality made product.
Cheers, Dennis!
The last decent wheels BMW used were made by BBS and Mahle. Big rims and UK roads don't mix. However, like a lot of other people, i bought a car and it had these wheels on it, i also fitted the cottons expecting another level of quality. BMW has lost its way regarding quality, and i've owned them since 1985. The decline has been noticeable on every model since then.
monthefish said:
roofer said:
and the 313's were actually lighter than the 225'S that came off.
Which ones did you buy?I tempted to buy some, purely because they'll be (far) easier to clean...
http://www.ebay.co.uk/itm/x4-19-BMW-E90-E91-E92-E4...
Hi
As per my earlier response, some people do indeed not experience issues with lower quality wheels and others do manage to bend and crack oem and higher quality ones. It's just the chances of failure of some level is higher with lower quality wheels that's all. I've only ever put on genuine BMW Tuner brand wheels or, very high quality aftermarket brands on my cars and never had an issue, and my only time using a replica wheel, it cracked at town speeds of circa 25-30 mph - I dread to think what would've happened had I been at motorway speeds. As a result of that, and of course seeing and reading what other people experience, I regard wheels as a safety related item and thus will not compromise in that respect.
Good luck once more! I do hope they work/last well for you!
Cheers, Dennis!
As per my earlier response, some people do indeed not experience issues with lower quality wheels and others do manage to bend and crack oem and higher quality ones. It's just the chances of failure of some level is higher with lower quality wheels that's all. I've only ever put on genuine BMW Tuner brand wheels or, very high quality aftermarket brands on my cars and never had an issue, and my only time using a replica wheel, it cracked at town speeds of circa 25-30 mph - I dread to think what would've happened had I been at motorway speeds. As a result of that, and of course seeing and reading what other people experience, I regard wheels as a safety related item and thus will not compromise in that respect.
Good luck once more! I do hope they work/last well for you!
Cheers, Dennis!
E30M3SE said:
DennisCooper said:
Hi Roofer
Yes, some people do indeed report no issues with replica wheels and you do seem to have had good luck in that overall !
However, by logic that replica wheels aren't made to the same higher standards, have the higher grade materials used to make them, any R&D etc it stands that they are indeed an inferior product and prone/likely to crack, bend or fail more than a quality made product.
Of course, genuine wheels, branded higher quality wheels etc can and do bend/crack, but chances are also correspondingly less.
As per above, good luck to you !
Cheers, Dennis!
Generally I would agree with you, but BMW Styling 225's cannot be described as the bold above.........Yes, some people do indeed report no issues with replica wheels and you do seem to have had good luck in that overall !
However, by logic that replica wheels aren't made to the same higher standards, have the higher grade materials used to make them, any R&D etc it stands that they are indeed an inferior product and prone/likely to crack, bend or fail more than a quality made product.
Of course, genuine wheels, branded higher quality wheels etc can and do bend/crack, but chances are also correspondingly less.
As per above, good luck to you !
Cheers, Dennis!
Gassing Station | BMW General | Top of Page | What's New | My Stuff



No pothole involved and the 3rd fractured rim i've had.