Vantage fuel filler flap
Vantage fuel filler flap
Author
Discussion

KEFKEF

Original Poster:

78 posts

184 months

Friday 24th August 2012
quotequote all
Mine has started to stick, takes repeated pressing of the release button before it releases. Anybody else had this issue?

It is going for its 3 year service soon so I will get it fixed under warranty but just wondered if there was a simple fix.

Lunablack

3,494 posts

191 months

Friday 24th August 2012
quotequote all
Mine was sticking on occassion.... Bridgemill sorted it when it went for service last weeksmile

I think they just oiled the release cable

X7LDA

940 posts

233 months

Saturday 25th August 2012
quotequote all
Common problem.

Spray some WD40 onto the cap release spring (once it's open - the wee black 'button') and press it in/out with your hands a few times. Repeat process.

Do this once every few months and you'll be golden.

Cheers

Jockman

18,410 posts

189 months

Saturday 25th August 2012
quotequote all
Yup common issue and I had mine sorted easily enough by Wilmslow. Just a bit embarrassing at the petrol station and I resorted to using the internal release in the boot a couple of times.

If you are about to do your 3rd year service - therefore your original warranty ends too - get them to check the front thermostat too...and the paintwork around the handles and keyholes....and the wing mirror stands smile

Lunablack

3,494 posts

191 months

Saturday 25th August 2012
quotequote all
Jockman said:
- get them to check the front thermostat too...and the paintwork around the handles and keyholes....and the wing mirror stands smile
The rear thermostat should be oksilly

BingoBob

1,098 posts

176 months

Saturday 25th August 2012
quotequote all
What's the issue with the thermostat? Mine's coming up for it's 3 year service and I'm making a long list of stuff I want fixing under warranty. smile

Lunablack

3,494 posts

191 months

Saturday 25th August 2012
quotequote all
BingoBob said:
What's the issue with the thermostat? Mine's coming up for it's 3 year service and I'm making a long list of stuff I want fixing under warranty. smile
They can stick open, and thus prevent the car from warming up properly, or taking ages to warm up....

It's an easy fixsmile

V8V CG

134 posts

193 months

Saturday 25th August 2012
quotequote all
X7LDA said:
Spray some WD40 onto the cap release spring (once it's open - the wee black 'button') and press it in/out with your hands a few times. Repeat process.
Brilliant! Thanks. Now opens first time instead of having to keep tapping the release button like a frenetic woodpecker.

KEFKEF

Original Poster:

78 posts

184 months

Saturday 25th August 2012
quotequote all
Perfect now, thanks for all the advice.

I will also get all the other stuff checked as suggested.

Thanks again.

Keih